1 / 8
spiggytech portable chassis for ASRock X300M-STX — zdjęcie 1
1 / 8

spiggytech portable chassis for ASRock X300M-STX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a reimagining of my older X300M-STX Chassis. Starting from the ground up, I added features.

Ocena
0 / 5
Polubienia
17
Pobrania
126
Wydruki
0
Wyświetlenia
1681
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an unusual amount of movement. 

This is for the ASRock X300M-STX Motherboard that comes from the DeskMini X300

Assembly Manual will be added later.

Case is printed in PLA+ 

 

Materials: 

4x  M3x6mm for the mobo standoff anchors

4x  M3x6mm for the standoffs

4x M3x6mm screws for holding the mobo 

20x M3x8mm screws for holding the chassis together

2x M3x8mm screws for holding the power button

4x M3x10mm screws for holding the carry handle hinges

2x M3x8mm screws for additional strength to the carry handle hinges

2x M3x8mm for capping the carry handle to the hinges

 

Updated 2/8/2023: 

Some small adjustment to the IO panels. The rear IO's Antenna holes are enlarged slightly for quicker install. Front IO's button has been flattened so it can be printed face down for a textured front. Likewise there's some tolerance adjustment to front IO components. 

Tagi