Liczymy pasujące modele…
Model description The Airbus A380 is the world's largest passenger airliner and only full-length double-deck jet airliner. It typically has seating for 525 passengers, with a maximum certified capacity for 853 passengers. Airbus studies…
1:200 Desk Model of the Airbus 380-800. The .3MF file contains the parts for the print.
Hello! This Glider has been based off the world’s largest passenger plane the Airbus A380-800 . Both the wing (and body) shape as well as the tail wing/stabiliser are nearly identical to the actual plane however to allow the plane to…
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
This model is compatible with the lego system.
Save your thumb! This is a simple speed loader for 380 Auto micro pistol single-stack magazines. It works well with the Taurus Spectrum, Bersa Thunder 380CC model, and probably other 6 - 10 round micro 380 pistols. You can use just about…
.380 ACP, also known as .380 Automatic Colt Pistol, .380 Auto, 9x17mm, 9mm Browning, 9mm Browning Court, or 9mm Short, is a centerfire handgun cartridge designed in the United States of America by John Browning in 1908. Print this for…
3x clips, and 1x each of the mounts. PETG seems to work well. I used something called “chicago screws” to flat mount it to the box (can make water resistant by adding rubber washers to them). Public domain, do whatever you want - sell it,…
Apache 3800 Insert Blank - The dimensions are pretty close to accurate but it can be customized to suit your needs.
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…
This is a simple speed loader for the Smith & Wesson M&P Shield EZ pistol single-stack magazines in 380Auto and 9mm Luger chambering. It may also work with other magazines of a similar size, but is specifically crafted towards the M&P…
A plaque for the Orbital 380mm Barrage UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more accurate to the in game version.
In the building of my DIY NAS: 2017 Edition using the SilverStone DS380 case, I noticed that my hard disk drive temperatures were running a few degrees higher than I was comfortable with. I wound up reading a FreeNAS forum post describing…
[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…
This model is compatible with the lego system.
This model is compatible with the lego system.
The Airbus A380 is renowned as the largest passenger airliner, accommodating up to 853 passengers in a single-class configuration. With its distinctive double-deck design and impressive range of over 8,000 nautical miles, it offers a…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Key storage in Airbus A380 design. Up to 4 keys. For mounting on the wall just drill 2 screws through the inner two engines. If you want it bigger just scale the model in your slicer programm.
designed for a dual skar 6.5 setup on a 3800 box
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
This is a phone support for the Logitech K380 keyboard. I love this keyboard and had the idea of turning it into a laptop for my phone. I used some parts from a project in Thingiverse, so consider this design a remix of:…
My use case is for my gun closet that is getting pretty full. Wanted a gun mount that keeps them close to the walls and won't get in the way of retrieving long guns. Also, I needed the mount to fit any handgun of a caliber not just gun…
These plates are designed to offer customization options to those who wish to add their own logo. They are print-ready and available in two variations - non-chamfered and chamfered edges. Print at 100% infill. Have a logo you would like?…
This is a bracket for the Apache 3800, mostly sold by Harbor Freight, that provided mounting holes to mount a face plate to the bottom of the case. For Cyberdeck's, Ham Radio, or any other need you can think of. These brackets are most…
Snapfit camera mount for a V380 camera. Snaps perfectly to the frame of the Ender Creality 5 Plus. The camera can be locked into place by rotating it onto the mount. Print orientation: Best printed on its side otherwise the print lines…
Remixed from Prusa printable parts for Prusa i3 MK3. I'm using the steel frame from Orballo Printing and I have not been able to find a compatible X motor mount so I made this. I just edited the scad files in order to be able to use the…
Designed for the Apache 3800 case, for two Recoil MX65 drivers. .step files are included if you wish to mod them for different drivers. The outer trim requires 12 m4 heat set inserts, and is mounted with 12 m4x16mm screws. Speakers are…
A holder for large rolls of paper towels, usually found in car workshops and companies. I used a 15 mm wood stick where the roll sits on. And therefore the hole is 16 mm. Print one mirrored Updated hexagon model 50% Infill/ Gyroid PETG
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
NEM 380, “Fixing Elements for Containers and Interchangeable Superstructures” is a standard developed by MOROP, the European Association of Model Railroaders and Railroad Friends ( https://www.morop.org/ ). The standard describes how…
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
Someone asked me for this size and I thought it would be a very interesting exercise to try to make a 380mm circumference that can be printed on a 220mm bed. And, it came out great! Pretty straightforward, similar to my other lazy Susan…
I needed a simple magazine storage container to house my extra, loaded LCP2 380 ACP magazines. I built 2 versions, a single and a double holder to house both the standard 6 round magazine as well as support for the extended 7 round…
The model is split into two halves. The .3mf has 20% infill but the STLs can be printed solid for better weight. The .3mf file uses 1 material (PLA Black @ .020mm) Assembly - Glue Is Required, please see pictures. I used Gorilla Super…
Better than seeed original case. Didn't block and didn't reflect sound wave by case.
I created several boxes to store ammo in cans. These work with 223, 556, 380 or 9MM. The ones standing print much faster that way and they don't suffer in quality. Enjoy!
Thanks to @Eistee_158202 for providing the resources that allowed me to generate the labels. For more info have a look at: https://www.printables.com/model/676564-gridfinity-bin-labels-hexagon-socket-head-cap-scre I uploaded only a few…
Wall mount for eufy HomeBase S380 (HomeBase 3)
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
Remix of the rugged box to accommodate ammunition in 9mm or .380 200x185x60 version can house 2 x dividers each holding 240 cartridges plan to add thing foam to the lid and underside of top divider. scale down to 10% models are huge
These are a set of checkered Grips for the Browning 1911-380. I like to print the first few layers (a mm or two) in a different color. Note, I changed the original screws to countersunk screws as they recessed better
This is a .380 ACP prop/dummy cartridge material: PLA slicer: Cura layerheight: 0,12mm infill: 10% infillpattern: triangles If you find any errors with the model please let me know EDIT: dimension Error should be fixed
The speaker/mic rubber port cover of my Retevis RT3S crumbled to pieces, so I designed from scratch this replacement port cover. From my understanding, the Retevis RT3S is the same radio as the TYT MD-UV380, so I think it will be…
Custom-fit lower insert template for the Apache 3800 case . Precision Fit: Includes a 1° taper to match the case walls. Customizable: Designed as a base for you to build your own organizers or tool trays. Valve Compatibility: The "RV"…
I found it strange that a blower style card wouldn't have skeletonized back bracket so I made one add tree supports and have fun
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
print in PLA with 6 walls
Watch the full video on the channel :
You can make a Lufthansa, Emirates or a Singapore Airlines A380-800
Gedruckt aus TPU 98A von 3DJacke. Auf die beiden Dichtlippen achten, diese zeigen bei der Montage nach außen.
To build one of these, you will need a Schill Gt380 http://www.markertek.com/product/schill-gt380/schill-gt380-19x11-plastic-rubberized-cable-reel . They are not inexpensive. You will also probably want the optional solid lid plate and…
I wanted to have a custom plate to have the outside of the Harbor Freight Apache 3800 hard case. More Soon designs soon to come of other brands if suggested. Please like and share your makes! Use 100% infill for best results. Printed in…
.380 ACP / 9X17mm stacking loading block. Category: Tool Holders & Boxes
This model is exactly the same dimensions as the actual round, so this model is better suited for Stereolithography type printers. Final sanding may be required.
remix of Skadis logitech K380 from Dirk Hoefle. this version is optimized for flat surfaces. three versions: No holes → for use with double sided tape Tho Small Holes → for use with two small nails (and maybe double sided tape in…
Inspired by a Taurus Curve, this makes it safer and less obvious to have a Taurus .380 PT 738 TCP in your pocket. Also holds a 2nd magazine. It''s one my my earliest designs, photo is of the original, printed on a Prusa Mini+ with…
QYT KT-8900D & ZASTONE MP380 Knob Similar size as orijinal knob. I haven't test it on KT-8900D but the that device looks the same, just branding. If you like this design please consider buying a coffee for me. Lol. Thanks…
Quick release wall mount for the vtech bm3800n, which allows you to move the monitor from room to room easily and fast Attach the official (supplied) mount to the camera first, then print and mount this bracket in as many rooms as you…
This is a wrench to remove the Barrel Bushing on a Browning 1911-380 (It may also fit the Browning 1911-22 but I have not confirmed if it fits) I printed it in ABS at 100% solid for extra strength.
Printable fender flare in 6pcs. Glue together, bondo and sand. I printed it in PETG and used super glue. Flip/mirror to make left side.
Adapter für größere Schläuche mit 3 Schnapphaken am Anschluss des Schlauches und 142mm Durchmesser. Passend zu meinem Durchführungssystem um die Klimaschläuche möglichst ohne Luftverlust durch eine Platte am Rollladen zu führen.
Created this grid base for a Harbor Freight Apache 3800 box so I could attach various components to it for use as a battery box. I used doublesided tape to secure the grid to the box bottom. The A and B sides will just fit on an ender 3…
Schnellkupplung für den Schlauch eines Klimagerätes (hier Trotec PAC 3800 S Der Schlauch kann in der Rolladenplatte per Bayontettverschluss befestigt werden. DAmit kann zwischen mehreren Räumen schnell gewechselt werden. Ich werde noch…
This is a sort assistant for 9mm and .380 casings. Just drop a bunch in the funnel and shake it around. The casings will fall into the holes head stamp down allowing you visually see or physically feel the height difference between the…
Remixed for Walther PK380. Single stack 380. This took a little work in tinkercad to keep the thick walls and the right size for the plunger, But it turned out ok, and fits perfect. I modded the pla file and upsized it for printing in…
Hello, Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. Assembly Instructions: Print in PETG @ 15% infill Flat sides down. Do not…
Tamiya 380 adjustable motor adapter Print instructions Category: Toys & Games Summary Tamiya 380 adjustable motor adapter
Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued in. This can be printed by both FDM and resin printers, although…
This is a remix of the original model plus the feet and legs from another one (that I can't currently find again, my apologies) so that the bottom simply slots into place with a twist. All edges are filleted and the overall assembly…
This is a 2x1x3 Gridfinity bin for the Wiha 3801 stubby screwdriver. I believe this will also work with the older 380 model, but I have not tested this. It will not fit the newer 3802 stubby, nor will it fit other model stubbies (281, etc).
I printed mine on a Prusa MK3S using white PLA+ and split the model into two halves. After printing, I used super glue to bond the halves together. I also added a brim during printing to help prevent the parts from tipping over.
It's a replacement cap for DC24 wand upper handle. Print it out with the flat part (top) against the plate, and pop it on.
Simple remix of the stand by Nestea Anker produce also a very similar hub, confusingly commercialized also as 8-in-1 that has two hdmi ports. This hub is also known as “media hub”, model “553” or “A8380” (you can find this last model…
This is a Rear Fiber Sight for the Browning 1911-380 (it should also fit the 1911-22) I found a front sight here and decided to make a rear sight to match https://www.thingiverse.com/thing:4249698
.380 ACP / 9X17mm Vase Mode stacking loading block. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: none Notes: Print in Spiral Vase Mode with double your regular Perimeter Extrusion Width (0.9.) Category: Tool…
A cage for the TYT uv380 DMR radio, it puts a fence around the side buttons and a cover over the frequency adjustment knob on top of the radio, mounts to the battery and doesn't block the battery button.
Adapter for original Creality LED Bar from variant for CR-10 (380mm) to install on V3 SE/KE. I bought this variant by mistake, but… it's wider and give more light :) P.S. On photo I still have a mess with cables because, i was too lazy to…
Lenco S002285 Replacement Hinge for models: Lenco L-3809 Lenco L-3818 Lenco L-401 Part1 is comleted and tested. Part 2 is not completed!
A simple grip that slides onto a 10-round magazine for the Bersa Thunder 380 pistol.
This should print and have a good fitting. I printed at .2mm layer height on my printrbot Metal Plus
Realized one afternoon that I needed a semi "tactical reload" for my pocket pistol; after having to shoot at a stray dog, I was left with only 3 rounds in my CCW for the rest of the day. Needed something in between carrying a full box of…
Reloading block designed for the .380 ACP. Could also be used with 9mm.
Rotor is a very tight press fit. If you can't get it on, you can try reaming the hole out with a 3/16" drill bit to loosen it up. This is the intended motor for this siren https://www.amazon.com/dp/B08DG2KXZB No buck converter required.…
This is a flexible / articulated 3D model inspired by a modern Airbus A380–style passenger aircraft ✈ Designed as a print-in-place model , it prints in one piece with no supports, no glue, and no assembly required . Thanks to its…
This is a remix from "Y Bar Stopper P3 Steel XL" by Hobsie. Y bar stopper for P3STEEL using stock 380mm Anet A8 smooth rods. Add a washer for better stability. My PRUSA I3 STEEL frame is from Orballo Printing.
Work in progress... I lost the different versions of the freecad file, I'm designing a new one. Category: Automotive
Originally published here: Samsung Galaxy Tab A2 S t380 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to…
This is spare butterfly nut for all Gardena 380 Cylinder Lawnmower models. Original part is made of POM (Polyoxymethylene), but I made mine of PETG (threaded) and ABS (nut insert). Print instructions Category: Outdoor & Garden Summary…
A simple snap cap/dummy round with a TPU primer insert. Print the snap cap in something rigid with good layer adhesion and the insert in TPU. The snap cap should survive cycling a few times if you aren't too rough with it. Always cycle it…
I created this adapter plate to mount a Cognex 3800 camera to the base of a swivellink arm. Printed in PETG @ 0.2mm layer height, no supports needed. Threads (¼-20) are modeled in to the plate, which worked well for my application. I used…
We recommend to use good quality TPU, the lower the shore hardness the better grip. The softer the material is - it will wear down quicker. The program I attached is specifically for Polyflex TPU90 from Polymaker, If you are using…
I had no convient place to store the Link-Dongle when it is not in use, so I created a holder, that attaches to the Evolve2 65 Charging Stand. I have created a version for the USB-C variant and also for the USB-A variant. German - Deutsch…
