1 / 4
Surface Finish Speed Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple model to evaluate the surface finish with different speeds
- Rating
- 5 / 5
- Likes
- 107
- Downloads
- 1,071
- Makes
- 3
- Views
- 3,512
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be.
This test has eight sections to test the finish:
- 45 degreee overhangs
- indent text, digits and shapes
- curved zig-zag
- 90 degree sharp turns
- medium and big curves
- 90 degree big turn
- wide zig-zag
- vertical indents to evaluate face to face
The model is 30mm in height, with 3mm sections, so 10 different speeds can be tested (e.g. 20 to 200 mm/s).
The Thickness is chosen to be two extrusion widths (0,42-0,45mm).
The test takes roughly an hour (greatly depending on your settings).