Gardena System Watering Jet HF (high flow)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A high flow watering jet for the Gardena system, maximum flow, minimum resistance, minimum time effort.
- Rating
- 4.818 / 5
- Likes
- 800
- Downloads
- 2,610
- Makes
- 29
- Views
- 13,869
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden.
So i tried many different designs by myself and came to this simplified high flow jet. With this jet the resistance is reduced to a minimum, the cross section is maxed out and the throw distance of the water is in my case around 2-3 meters. It does not spray, only a litte distribution to be kind to my plants.
Print it with the jet tip on the build plate - the gardena coupling upwards. Very simple to print with any filament types. No support needed.
You need a rubber o-ring for sealing (16mm outer diameter, 2.5mm ring thickness).
Have fun and post a make if it helped you save your time for watering!