Gardena System Watering Jet HF (high flow)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high flow watering jet for the Gardena system, maximum flow, minimum resistance, minimum time effort.
- Ocena
- 4,818 / 5
- Polubienia
- 800
- Pobrania
- 2607
- Wydruki
- 29
- Wyświetlenia
- 13 850
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden.
So i tried many different designs by myself and came to this simplified high flow jet. With this jet the resistance is reduced to a minimum, the cross section is maxed out and the throw distance of the water is in my case around 2-3 meters. It does not spray, only a litte distribution to be kind to my plants.
Print it with the jet tip on the build plate - the gardena coupling upwards. Very simple to print with any filament types. No support needed.
You need a rubber o-ring for sealing (16mm outer diameter, 2.5mm ring thickness).
Have fun and post a make if it helped you save your time for watering!