Table leg extension Ikea Lack (50MM-200MM HIGH)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two leg extension models for Ikea Lack
- Rating
- 5 / 5
- Likes
- 257
- Downloads
- 1,183
- Makes
- 6
- Views
- 4,842
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Three simple models to extend the height of the Ikea Lack table.
Extensions range from 50mm to 200mm high.
As each printer is a world, I include a dimension test that I recommend to print before to check that the extension really fits in the original leg. If the test does not fit, try scaling the part and try again.
Print with a quality of at least 0.3 and a fill of 30% or more.
If you like my designs give me like and share. If you like them a lot invite me to a coffee.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
ESPAÑOL
Tres modelos sencillos para extender la altura de la mesa Ikea Lack.
Las extensiones van desde los 50mm hasta los 200mm de alto.
Como cada impresora es un mundo, incluyo un test de dimension que aconsejo imprimir antes para comprobar que realmente la extensión entra en la pata original. Si el test no entra, prueba a escalar la pieza y prueba de nuevo.
Imprimir con una calidad de al menos 0.3 y un relleno del 30% o más.
Si te gusta mis diseños dale me gusta y comparte. Si te gustan mucho invítame a un café.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
Etiquetas