Counting matching models…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
DungeonStick Church or Cathedral setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Use the included couplers to create a symmetrical build. Functional doors (print in place). Give them…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
I've teste this model on most desks and tables and it has worked quite well, as long as the hanging surface isn't too thick it'll work just fine, I plan on making a second version with more tools attached: keychain friendly, bottle…
I need 10cc measuring spoon for fertilizer with density of 1.0 - 10cc for 10g that is good for my planters. There are several measuring spoons on the net but most of them are for old openscad and didn't work for me. So I made one that is…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
This 3D-printed Tabletop RPG Counter is a practical and customizable tool for tracking life, stamina, mana, spell points, or any resource used in your RPG sessions. Designed for tabletop players who want clarity and convenience, this…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Meet the 3D Printable Flexi Nurse! This adorable, poseable nurse figure is here to bring some care and flexibility to your 3D printed collection. A perfect gift for healthcare heroes or medical fans! Please note: if you purchase this item…
Table clamp for 10 mm rods. Ideal for setting up physical experiments. The clamp can be used in a variety of ways. Fully customisable thanks to openscad.
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
This is ongoing project and will still require development! My personal progress blog on the project can be found here . As I hit major milestones in the project, I will periodically update those files. I'm receptive to the idea of…
Adjustable Shower Head Holder. If the holder slides too easily in the collet and it cannot be clamped, treat the hinge surfaces with cyanoacrylate glue and let them dry.
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
Realistic old style boat with paddles - easy to print and assamble. For assemble you need just some glue you are comfortable with. Supports are needed just on flat base ring where floor sits and that's it. You can tweak weight…
I need 10cc measuring spoon for fertilizer with density of 1.0 - 10cc for 10g that is good for my planters. There are several measuring spoons on the net but most of them are for old openscad and didn't work for me. So I made one that is…
!!! Print it on its back !!! Print time for SLIM V1 version is about 3h 20m Print time for WIDE V2 version is about 7h Print time for AX (Snap) Wide V3 is about 5:30 Base, 1:10 Ladder, 0:20 Leg I have tested only 0.4 nozzle so go above or…
Remix of Crummjys's Chunky Tablet Stand (Laser Cut). Works with tablets and phones.
Adjustable ventilation cap. I use it with a laser engraver to regulate suction. Diameter 60mm An M5 socket head bolt and nut are required for assembly
I wanted a way to get some more interesting shots for my Youtube videos, so I designed this small adjustable dolly for my GoPro. Hardware Required: -2x M4x6 Hex Screw -7x ¼ x 18mm Hex Head Bolt -2x ¼ Nut -4x 608 Bearings Supports only…
Designed by me to restore a broken camping table. May be of some use to you. Fits tables like the one shown with a leg OD of 20mm (the hole in my bracket is 20.4mm) Supports not needed if you print the brackets with the triangular ribs on…
Stand is made from more parts. Use “AsemblyScheme.pdf” (and instant glue). You will nedd more parts : Screws : M3x12; M8x16; M4x10 Pads : Felt pads 38mm, Silicone pads 10mm see the “AsemblyScheme.pdf” Good Luck … :)
I remixed the great design made by @AndreasJade_261770 to print it from PLA in one piece using support material at the interface. Printed it standing up in about 5 hours on my Bambu Lab P1S.
Turntable (lazy susan) that can be used either for storage (e.g. organizing stuff in kitchen cabinets) or for other purposes (e.g. painting models). This remix uses a bracket with double the wheels, so that the top plate does not bend or…
Thanks to the open source Titanic model, as the basis for the design of the Titanic-themed night light. The easiest way is to buy electrical parts designed specifically for a ring light, Provides easy installationwithout the need for…
Phone/tablet stand with slot for charging cable. I printed it in PLA with 5% infill, no support needed.
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
Heyho Yesturday I came up with the desire to create my own turn table xD So here it is! Features Strong : I designed this Table to hold quite some weights. The main tolerance/ wiggling will be due to the bearing itself. In my tests I…
My best iteration yet. The connections pop into place and have a firm connection, no accidental disconnects from swiveling like in my early figures. Joint movement is smooth like butter, (if only somewhat tough in a few areas) and will…
I created this headphone hanger to fold up when not in use. Mounts with four 4mm sink head screws. For the hinge I used a screw M3x30mm, a self securing nut and two washers.
This is a arm for a Magsafe charger or a stand which can be moved and held in a wide variety of positions. It can be mounted right side up or upside down. The clamp is 50mm so should be able to mount to most furniture -When changing the…
Estas son partes complementarias al trabajo realizado por theamzngq en su “ Adjustable iPad Air 2 mount ”. Una base con un poco mas de peso y sin modificar las dimensiones que se realiza insertando en medio de la impresión 20 tuercas M8.…
This is a simple version for a pliers holder that can be mounted on the wall. The holes from the original design are still there but it can be mounted using good quality double sided tape and it should support the weight correctly.
Kleinere Basis für die Halterung von https://www.printables.com/@Martinhensge_1708943
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
A simple box that can be zip tied to your work wall or structure. Feel free to remix to suit your workshop, classroom or studio needs!
Allows for more clearance at the back of the saw (e.g. for a roller table for out feed)
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
Scale model stable suitable for a nativity scene with 1:15 scale figurines (e.g. 80-100mm in height when standing). The design includes 33 separate model files, including: Walls (textured) Wooden posts and door (complete with texture)…
Updated Version 2 available easy to use. This tool allows users to create music staffs of adjustable sizes, ideal for personalized music notation. Whether you're a musician sketching ideas, a composer drafting a new piece, or a teacher…
Optimised for FDM printing with top flat on build plate. Compatible with 8x2mm magnets. Sizes Include: ROUND / STANDARD : 25mm 28mm 32mm 40mm 50mm 65mm 80mm 90mm 100mm 130mm 160mm LONG / VEHICLES / MOUNTS : 25 x 70mm 32 x 80mm 40 x 95mm
Spread holiday joy with this adorable Santa Claus Kid Figure & Ornament ! 🎄✨ This charming design features a kid dressed as Santa Claus, now available in two versatile versions: Figure Version – Perfect for display as a festive decoration…
To be used with STL file SV06 Plus Filament Holder w/Guide and Retractable cable holder ➕ ・Template to download and 3D print・Cults
Printed with Bambulab P1S, PLA Basic and PLA Matte filaments. Sliced with Orcaslicer, I've been testing scarf joint feature. Adjust objects and texts (parts of the objects) colors. Disable ironing if you are uncertain if you are uncertain…
I found myself playing my steamdeck mostly on tabletops and when using this stand the angle was uncomfortable for my hands, so I decided to remake it with sharper and adjustable angles. This stand can be positioned in 5 angles and fits in…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m. First complete parts B(C,D) and E(,F,G,H,I). Seconds models:
This tablet holder was designed for my old Lenovo Tab S8, a 10+ year-old testing device. It features a convenient hole for cable management and vents to ensure proper airflow. The holder is highly stable and capable of supporting larger…
Hi, Here's a sheepfold or stable kit, you can make using laser cutting or 3D printing. For laser cutting, the thickness is designed for 3mm wood or cardboard. It is possible to scale it for another thickness. - 2 x Cote - 6 x Toit - 1 x…
Printed on MK4s with thicker walls and 50% infill.
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
I designed a snowflakes lithophane tea light ornament you can hang or stand. For LED tea lights only!! The main sphere is 70mm in diameter, with a lithophane shell to allow some light through that too in varying degrees. The snowflakes…
I created a stand for my external Drive. I use the following Drive: https://www.amazon.com/Elements-Portable-External-Drive-WDBU6Y0050BBK-WESN/dp/B089978LBB Feel free to remix etc.
A Simple Magnetic Frige Holder for the OT6 Tablet it uses 12mm x 5mm Magents for Strong Holding Source Model can be found here:…
This 3D model of the "E" letter keychain is crafted with precision, offering a stylish and practical accessory for everyday use. The sleek and versatile design is ideal for personal use or as a meaningful gift. Key Features: Modern Design…
Just an easy to print model with snap fits for the usb and psu module.
Replacement latch for a Staples File Box File Portable Tote, part numbers 140165/111112 or 140163/110997. Print from PETG or similar for a mix of flexibility and strength. PLA is not recommended as it is likely to be too brittle.
Link two tablet supports to have a single one in the center, so the kids or passengers can watch the same shows. Can be used between the back or front seats. It's only compatible with supports that use a swivel ball joint. Files are…
Size 108x135x105(hight)mm. For insert you can use brim. Tested PLA 0,2mm random seam. Next model:
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
GEN2 185 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 185 is the STANDARD depth (about 171 mm inside), sized for everyday storage. GEN2 was originally built to mount under a desk · this…
This is for the Trivum TouchPad 7. You can use this to mount the tablet and place it on your desk. Use some anti slip feet on the bottom and i use a few pieces of double sided tape to attach the unit to the stand. No supports needed to…
I printed this model from simple PLA, it does not require any support. It was sliced with a layer thickness of 0.2.
Gedacht zum Transportieren von Medikamenten oder Lagerung Auf Reisen. Ich persönlich habe die Lücken mit Epoxidharz gefüllen
Remix of Draizer's shelf holder for 2020 extrusion. Instead of being inset into the 2020 frame, my board sits above the 2020 frame. This extends Draizer's design up to flush with the frame which allows 1 ¼-1 ½" screws to connect with the…
The 3D Printable, Modular Spoilboard for the Sainsmart Genmitsu 3030-PROVer MAX CNC consists of 4 interlocking panels that can be mounted directly on to the aluminium bed of the 3030. As the spoilboard gets damaged during machining you…
In case you have trouble adjusting the leg - you can use this handle
A simple but suitable case for a USB 5 port power supply from the company Anker. The case can be screwed under a wooden table with simple screws. Suitable power supply: https://amzn.to/4iQ8pmi *Affiliate Category: Electronics
A simple Table name for a wedding. Is Written FILIPA & FLAVIO for a wedding. On this photo was split in 3 parts to print. 0.2mm
GEN2 165 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 165 is the MINI depth (about 151 mm inside), sized for sockets, tools and hobby bits. GEN2 was originally built to mount under a desk…
They are kind of stencil digits, but without the usual similarity to military stencils. Usable as lantern plate, key ring and much more…
holder for storing tubes for effervescent tablets. Can be connected in calusters
The corners of the aluminium extrusion profile of my Hammer table extension are rounded but still sharp enough to hurt if you bump against it. To cover them up, you can use this cap.
