Razorback from THE EXPANSE TV show - 1:30 Scale (adaptable)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.21 – €2.70 net (excluding VAT)
For file: Pipes_0.15mm_PLA_MK3S_3h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.45 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 3.06 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Razorback ship from the Expanse TV show
- Rating
- 4.933 / 5
- Likes
- 327
- Downloads
- 1,058
- Makes
- 18
- Views
- 6,574
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Share Alike
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be printed on a standard Printer or with MMU.
Here is printing size and scale table guide :
| Printing size | Scale | Height/Lenght | comment |
| 100% | 1:30 | 67 cm | |
| 60% | 1:50 | 46 cm | |
| 50% | 1:60 | 33,5 cm | |
| 38% | 1:80 | 25,5 cm | WARNING - Few parts become very small |
| 34% | 1:90 | 23 cm | same scale than MartinTaichl's Rocinante WARNING - Few parts become very small |
The details on the shell are embossed to facilitate the painting both in prusa slicer in case of MMU and with a brush.
For the fuselage 02 if you plan to print at 100% size, an inside block was designed to be changed by the interior design once it will be available. For printing at lower size I recommend to use the “Fuselage 02 - Smallest Version”.
The 100% size print needs around 4Kg of filament and 400 hours of printing.
Here is the assembly instructions :






