Counting matching models…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you…
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Humidifier cap for feather shuttlecock tube. Add around 15 water gel bead ( https://www.amazon.ca/-/fr/gp/product/B01L) in the small hole. Then submerge the humidifier in the water overnight. Use the humidifier as endcap for you shuttle…
Can be just printed as it is and set together in the middle. Printing needs support on bed. Print the outer parts of the spool facing towards the print bed. Can be customized to fit your weaving shuttle by changing the parameters in the…
Recently I had published the space shuttle, well now here is the Booster, SRB addon pack for her! This addon pack is only for the space shuttle you can find the shuttle orbiter by clicking here ! You need 6x M3 screws. - 1 X M3 0.8 cm…
This is an btt eddy holder, meant for a stealtchanger, in order to use it i made a costum shuttle, its the normal one with 2 heat inserts in the back, to attach the eddy. Then there is the Connector piece, which is basically just an…
Badminton shuttlecock dispenser with top and bottom closure caps 4 M4 x 20 mm countersunk screws + 4 bolts Recycled from an old feather shuttlecock cardboard tube For a 35 mm square post Printed in PETG
Recently I had published the space shuttle, well now here is the Booster, SRB addon pack for her! This addon pack is only for the space shuttle you can find the shuttle orbiter by clicking here ! You need 6x M3 screws. - 1 X M3 0.8 cm…
Carry your smokes and lighter wherever you go! The Space Shuttle conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
The whole contraption is really messy and the is sketch rather dirty, parts have many artefacts, it could use a lot of refinement but i'm not willing to give it right now. It's not blowing straight and might be slightly rotated. The…
This is a custom back for the HooToo Shuttle HT-UC007 USB hub. The original back had two design flaws: The finish of the plastic part was rubberized. This turns into sticky bubble gum after only a few years. The Ethernet port was designed…
Imperial Shuttle (Starships Select) Landing Gear Print Instructions Printed at 0.2mm layer height. Needs support on buildplate. Remove the temporary support after printing
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
Features print in place pivot part compliant mechanism to keep the rod in a closed position modular design easy to assemble and disassemble for maintenance Bom m3 heatset inserts (x4) m3 x 8mm bolts (x4) 5mm x 220mm carbon fiber or glass…
A simple shuttle of my preferred style, intended for tablet or inkle weaving. Made for rapid and easy printing for teaching classes.
This is a glow cup and glow cup lid meant to be mounted to the Humminbird Helix shuttle for their fish finders like the Helix 5 or Helix 7. This glow cup is motion activated and allows you to charge your UV jigs or lures when dropped in…
Star Wars imperial shuttle v1 - Holes made for two options on the underside Star wars v2 body. The gap for the wing joints have been widened to prevent snapping. If you have printed the v1 body file off the privet points on the body for a…
I buy eggs by a huge pack, so when I want to carry only a few to the stove, I needed something to hold them in. Since I think of it as “Shuttling” a few from the main area to the work site, I thought it needed to be a Shuttlecraft. I took…
Humidifier cap for feather shuttlecock tube. Add around 15 water gel bead ( https://www.amazon.ca/-/fr/gp/product/B01L) in the small hole. Then submerge the humidifier in the water overnight. Use the humidifier as endcap for you shuttle…
Here is a modular ice shuttle that all the parts printed on an MK3S+. Its parts were designed in tinker cad. I used Petg for everything with 3-4 walls and 30% gyroid infill. Supports are only needed for the transducer holder. Just about…
This is 3D printable model of the Space Shuttle OV-101 Enterprise from the Star Trek and the real life. It is a kit. The different colored parts are separated for easier printing. In the suffix of the files, there are color codes: w-white…
A replacement for “xxx_-_sat_logo_w_b.stl” from the original model by Martin ( https://www.printables.com/model/628010-space-shuttle-endeavour ). I removed the “Prusa Research” text and replaced it with the NASA worm logo. Print using a…
This is a shuttle shelf for the Toika Eeva loom. Put one on the right and or left side of the breast beam to have a nice place to rest your shuttle if you're doing a two (or more) shuttle weave such as overshot, crackle or color and…
navette spatial a imprimer en deux partie les reacteur est le corp le corp en blanc est les reacteur en noir
NASA's Space Shuttle program, officially named the Space Transportation System (STS), operated from 1981 to 2011. The Challenger OV-099 was first built as a test bed for the program, but in 1983, it would take its first maiden flight. The…
I picked up an older model Easy Weaver loom at a second hand shop, but it was missing quite a few pieces, including a shuttle. They are generally made out of a wood species such as beech, which is hard to find around here. In addition,…
Illuminated model of the space shuttle Discovery launch. The model was created for the 40th anniversary of the first flight. Model height: 65 cm. Printed on the Original Prusa MK3S. The manual is available in English and in the Czech…
This is the main ADDON to the Endeavour Space shuttle. This Addon gives you possibility to print different shuttle orbiters - the whole fleet actually. It is divided to individual folders and each consists of the shuttle parts, that…
Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This model is identical to my previous RT2 buggy, but the…
for weaving your net. you can tighten your strings with small pocket on it. thin and useful. P.S. I have updated the shuttle. you can use longer and ticker one too. have fun.
Just a remix to the Name Plate incorporating the text "NASA". I change filament mid-print at Layer 8…
Bring badminton to life with this detailed 3D miniature of a shuttlecock! Perfect for sports fans or as a decorative piece, this model is designed in three parts: the feathers, the tip, and a separate ring for the colored strip. The…
Right out from the '86 Transformers Movie, here's the Moonbase Shuttle zipping in to join the Iconic Ships collection! And here's how it looks when all printed out and painted up, displayed on the Iconic Ships display stand. From the…
This is an end delivery shuttle, I decided to create a version fully 3D printed. Typically that kind of shuttle has a screw to adjust the tension for the thread. Here instead of using that approach I build multiple add on with various…
This is a shuttle for a loom which permit two thread combined together. Tried to make it able to accommodate the extra spool while keeping it small. This is split in two parts that can be snap together like a lego block to keep it strong.…
From Smithsonian Museum ( Orbiter, Space Shuttle, OV-103, Discovery | Smithsonian Institution ). Uploaded to printables to shar this awesome model.
Made by me using Onshape. Took about 3 hours design cool prop for your desk. Printing it vertically would be best as there would be no need for supports and highest chance of a perfect print.
A retro-futuristic illustration featuring a space shuttle ascending through a celestial expanse filled with stars and clouds. Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Jade White Swap Instructions: Start with Black At…
Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…
i am into weaving cast net recently. so i am creating such things to suit my needs. best. EDIT: i have added 16x250 version as well.
Space Shuttle kit card ornament I made to give to my friends Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Hatchbox PLA PLA White Category: Decor
Not much to say, I just had this old watch and it still works so I made a base to place it on the desktop to use it as vintage decoration.
This is a 4" (10 cm) bobbin for a Leclerc weaving shuttle. This prints just fine without supports, but you may want to add a brim to keep from toppling over. Print instructions Category: Replacement Parts Print Settings Printer Brand:…
Not all interstellar or in-system cargo gets transported in military dropships, so I re-modeled this source design into a civilian drop shuttle for your all-purpose basic inter-orbital transportation needs, at 6mm scale (it could also…
Since the rear wheels will come off, I used two Technic Lifarms, thin 1x5, with Axle holes https://www.bricklink.com/v2/catalog/catalogitem.page?P=11478#T=C) and fixed them with two technic pins in the rear wheel bays. You can use the…
Unsatisfied with the existing options out there, I decided to design my own variant of the legendary space shuttle in launch configuration (full stack). It roughly matches the dimensions of the vehicle at 1:285 scale, but includes several…
Model captures Shuttle, Solid Rocket Boosters and External Tank suspended by a Cross-Hatched filament pattern within a Frame with integral feet. Printed in PLA White & Black Filaments .3 mm layers / 2 perimeters / 15% gyroid in-fill Black…
I thought it would be fun to have an Autobot Shuttle in my armada fleet. I intentionally made it small so as to be fun to me, but not distract from the overall fleet display.
This is a simple stand for the Jazwares Ahsoka Tano T-6 Jedi Shuttle from Micro Galaxy Squadron. It can support the shuttle in many different modes as the wing can rotate 360 degrees. If you use the gcode files, I used Hilbert Curve for…
Originally published here: Life Foundation space shuttle scaled one in five hundred by tato_713 - Thingiverse This model was requested by Joshua Jacobson . This is the rocket that appeared in the film Venom , where it was launched and…
The interface supports consist of the corner and side supports of the MLP that are attached to piers used to anchor the MLP. In addition to the original Apollo MLP piers, the shuttle added additional piers that attach to the underside of…
Device: AGGRC Strand Centi-Sizer v4.0.1 (Parametric Uniform 1-cm Cut) part of the Strand Cryopreservation Shuttle System (SCSS) Description: Prior to open-hardware device development, Aplysia egg masses were dissected into strands by use…
Wallmount for this Object: https://www.bluebrixx.com/de/bluebrixxspecials/104182/Star-Trek-Shuttle-Typ-6-BlueBrixx-Pro Print Settings Printer Brand: Creality Rafts: Doesn't Matter **Supports:** Yes Resolution: 0.2 **Infill:** 15%…
How I Designed This Used Prusa Slicer negative space to increase slots for more thread. Used resize to make thinner. Printed with no supports.
Needles: 10cm, 15cm & 20cm Shuttles: 10cm, 15cm & 20cm
I created this to be a budget 3d printable ice shuttle for the Hummingbird Helix 7. There is currently no support for other Ice fishing models but remixes are welcome. The shuttle includes a 3 position rod holder, integrated glow cup,…
Hello everyone, I have vectorised a technical drawing of the retired space shuttle and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in…
Articulating Star Wars Imperial shuttle. Remixed from original and includes colored design. Prints well but the wings are not geared to each other and move independently. Added custom stand to hold the shuttle up to display it with the…
Hello everyone, I have vectorised a technical drawing of the retired space shuttle and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 15 minutes! Please note the settings in…
Hello everyone, I have vectorised a technical drawing of the retired space shuttle and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 15 minutes! Please note the settings in…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Great stand for a great model of the Star Wars MGS Bad Batch Ship! I made two different versions; one for displaying the ship level and the other is to display it on an angle. Feel free to share a make in the comments section!
The model https://www.printables.com/model/109571-lego-space-shuttle-10283-ceiling-mount allows to mount the Lego Space Shuttle in a more stable manner compared to other mounts. Thus the shuttle can be placed on walls or ceilings in…
You see them everywhere - piles of excrement, left behind by hapless animals who don't know anything about the germ theory of disease or the relationship between feces & illness. Charitably: we've all experienced the dawning horror that…
This shuttlecraft is part of an unfinished project. It can be mounted on a 3mm peg. The STL is orientated vertically as this seems to have the best print results. Supports are needed for the bottom of the shuttle and nacelles.
This Benchy remix can be printed with almost no supports. The only support that I used is for the Shuttle nozzle. Maybe it is possible without. The parts can be connected together using connectors.
A tilted stand for the Lego Space shuttle set. Uses the same holes as the original stand, so no changes needed. Printed with Esun PLA + , 3 walls 15% Gyroid. Supports needed.
A bookend of the US Space Shuttle. There is a single piece file, and it is also split up for multicolor prints.
Hole dia. is 5mm. You will need a pretty long extension to screw in the top screw, acces holes are pretty large tho. The origial stand is being used and may only need a couple of pieces facing the wall removed. Please see the picture for…
This model is compatible with the lego system.
Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…
Bluster Bay shuttles use a proprietary cardboard pirn and don't accept pirns from other brands. These shuttles are no longer made and while you can still buy the pirns, I wanted to see if I could make my own in case they become…
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) Printed using a 0.2mm layer height with supports on Prusa Mini+
Print one of each and push the Hubble mount into the wall plate, add some glue and you are ready to mount the Discovery space shuttle to you wall along side the Hubble telescope. Add some tape to make the discovery more secure on its mount.
This is a tatting shuttle that uses small crochet hooks for the pick and Class 66 bobbins for the thread. I decoupaged the shuttles with napkins, tissue paper, etc. and on some I added bling. I used UV resin to finish them but you can use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
All parts are designed to print at 0.25 mm layer height, without support when oriented as is. Required hardware parts Two 608 ball bearings (8×22×7mm) Two 25mm M3 (preferably countersunk) for the shuttle clip Rubber band 16-25 mm M5 screw…
This wedge is used on either side of the REP x Pépin dumbbell shuttle to keep it resting in place. It was designed as part of a DIY dumbbell stand as explained here . Two wedges are used for each shuttle and screwed into the underlying…
Badminton shuttlecock dispenser with top and bottom closure caps 4 M4 x 20 mm countersunk screws + 4 bolts Recycled from an old feather shuttlecock cardboard tube For a 35 mm square post Printed in PETG
This shuttle was used by various Jedi in Star Wars: Young Jedi Adventures. I don't know any canon dimensions for this ship. The scale of this model should be around 1:270 by my estimate. Dimensions Length Width Height 70mm 65.7mm 18.8mm…
Here's a simple print that is practical and re-usable. It's the size and shape of a craft / popsickle / paddlepop stick so you can have your kids occupied with a new project in minutes. Make a basic “loom” out of cardboard (as shown in…
I made to scaled models: 1) with the metallic lever hidden - but is longer in total and thus extends outside the switch guard borders (Not what the gaurd was designed for ;-) 2) the tip of the original lever can be seen - but fits within…
This is a basic 1/2in x6" netting needle for net making and repair. There are two versions Thin and Thick
This consists of the Tail Service Masts of the MLP. This are part of the larger Shuttle Mobile Launcher Platform model. Updates: 7/12/2025: Modified TSMs and side ladders to clearance deluge pipes. Note: my build images are not correct. I…
This is a wargaming miniature of an orbital cargo shuttle. Natively sized for 10mm war games, scale up or down as needed for other scales. This should be simple enough for 6mm and detailed enough for 28mm, although some elements may be…
A remix on a great model, to make a kit card activity for your students. This is a flat kit card that can be printed many times and handed out for a STEM assembly project when learning about the engineering of the Space Transportation…
![[Iconic Ship Series] Moonbase Shuttle from Transformers the Movie](https://media.printables.com/media/prints/8257667e-d985-4083-9bde-7bfc1e56b627/images/13707931_b29d85de-ab49-421b-96ba-894e58bb91e8_1d826f7c-9dea-40b2-936e-5c9057550d28/moonbaseshuttle_fs.jpg)
