HooToo Shuttle HT-UC007 Case Replacement Part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom back for the HooToo Shuttle HT-UC007 USB hub.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 1
- Views
- 43
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
This is a custom back for the HooToo Shuttle HT-UC007 USB hub.
The original back had two design flaws:
The finish of the plastic part was rubberized. This turns into sticky bubble gum after only a few years.
The Ethernet port was designed as a movable part to save ~2 mm in height. Over time, the spring pushes the mechanism apart so that the plug no longer connects.
You will need five 2.0 mm screws with ~7 mm thread length and ~5 mm head diameter.
Be careful when fastening the screws so that you don't rip the plastic counterparts in the original case.
If you like this design, please consider leaving a ♥heart. Thanks!
Print Settings:
Resolution: 0.2 mm
Infill: 15% Grid
Filament material: PETG