HooToo Shuttle HT-UC007 Case Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom back for the HooToo Shuttle HT-UC007 USB hub.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 43
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom back for the HooToo Shuttle HT-UC007 USB hub.
The original back had two design flaws:
The finish of the plastic part was rubberized. This turns into sticky bubble gum after only a few years.
The Ethernet port was designed as a movable part to save ~2 mm in height. Over time, the spring pushes the mechanism apart so that the plug no longer connects.
You will need five 2.0 mm screws with ~7 mm thread length and ~5 mm head diameter.
Be careful when fastening the screws so that you don't rip the plastic counterparts in the original case.
If you like this design, please consider leaving a ♥heart. Thanks!
Print Settings:
Resolution: 0.2 mm
Infill: 15% Grid
Filament material: PETG