Lego space shuttle 10283 ceiling mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to mount a Lego 10283 Space Shuttle to a ceiling or a wall.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 58
- Makes
- 1
- Views
- 1,536
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
Since the rear wheels will come off, I used two Technic Lifarms, thin 1x5, with Axle holes https://www.bricklink.com/v2/catalog/catalogitem.page?P=11478#T=C) and fixed them with two technic pins in the rear wheel bays. You can use the lift arms with regular holes, but a M3 screw will actually screw into the axle hole which gives it a better fit.
Print one of the front wheel mounts and two of the rear wheel mounts. I used PETG, but PLA will also work I guess.
You need a 25mm M3 screw for the front mount and 4 30mm screws for the rear mount. The mounts have 4mm holes for the ceiling, but I used 3.5mm wood screws.