Lego space shuttle 10283 ceiling mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to mount a Lego 10283 Space Shuttle to a ceiling or a wall.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 1536
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Since the rear wheels will come off, I used two Technic Lifarms, thin 1x5, with Axle holes https://www.bricklink.com/v2/catalog/catalogitem.page?P=11478#T=C) and fixed them with two technic pins in the rear wheel bays. You can use the lift arms with regular holes, but a M3 screw will actually screw into the axle hole which gives it a better fit.
Print one of the front wheel mounts and two of the rear wheel mounts. I used PETG, but PLA will also work I guess.
You need a 25mm M3 screw for the front mount and 4 30mm screws for the rear mount. The mounts have 4mm holes for the ceiling, but I used 3.5mm wood screws.