Adjustable Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.92 – €9.68 net (excluding VAT)
For file: Project Build Plate / hkays-adjustable-spool-holder_02mm_pla_mk3s_8h5.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.80 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 8.86 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a fully adjustable spool holder designed to be screwed down onto your enclosure.
- Rating
- 4.95 / 5
- Likes
- 175
- Downloads
- 895
- Makes
- 16
- Views
- 9,354
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if you move one side the other moves as well. I recommend you use some kind of filament guide like this one: https://www.prusaprinters.org/prints/58073 for the popular IKEA Lack enclosure.
Printed parts:
- 1x Bottom Plate.stl
- 1x Top Plate.stl
- 2x Side Plate.stl
- 4x Rack.stl
- 4x Roller.stl
- 2x Gear thick.stl
- 1x Gear thin.stl
Hardware:
- 9x 608 bearing (608ZZ or open; Sealed bearings might not work)
- 4x M5x16 socket head screws + nuts
- 2x 4mm countersunk wood screw
For Remixers:
The STEP file: https://github.com/testudor/adjustable-spool-holder
Changelog:
- 22.01.2020: Made recess holes for M5x16 a little wider and less deep
Print instructions:
Use 40% infill for racks, print everything else in 15%. Depending on your print's dimensional tolerances you might have to glue the racks into the side plate or have to sand some pieces until they fit.
If you own a Prusa MK3/MK3S you should not need any sanding/glue at all.