Adjustable Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully adjustable spool holder designed to be screwed down onto your enclosure.
- Ocena
- 4,95 / 5
- Polubienia
- 175
- Pobrania
- 895
- Wydruki
- 16
- Wyświetlenia
- 9343
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if you move one side the other moves as well. I recommend you use some kind of filament guide like this one: https://www.prusaprinters.org/prints/58073 for the popular IKEA Lack enclosure.
Printed parts:
- 1x Bottom Plate.stl
- 1x Top Plate.stl
- 2x Side Plate.stl
- 4x Rack.stl
- 4x Roller.stl
- 2x Gear thick.stl
- 1x Gear thin.stl
Hardware:
- 9x 608 bearing (608ZZ or open; Sealed bearings might not work)
- 4x M5x16 socket head screws + nuts
- 2x 4mm countersunk wood screw
For Remixers:
The STEP file: https://github.com/testudor/adjustable-spool-holder
Changelog:
- 22.01.2020: Made recess holes for M5x16 a little wider and less deep
Print instructions:
Use 40% infill for racks, print everything else in 15%. Depending on your print's dimensional tolerances you might have to glue the racks into the side plate or have to sand some pieces until they fit.
If you own a Prusa MK3/MK3S you should not need any sanding/glue at all.