Search results: filamentspool

Counting matching models…

Printables

Filamentspoolholder / Filamentrollenhalter

Habe für mein Filamentlager zwei verschiedene Halter für die Wand-/ Bodenmontage designt. Die Montage erfolgt mit M5 Senkkopfschrauben.

Order a print of this model

Printables

Filamentspool holder

I've desinged this for my Filamentspools because I was tired of the axle holders ... . It is possible to use it from small spools (800g maybe less) to big ones (about 5 kg). You have to print the spacer four times. You will also need: 4 x…

Order a print of this model

Printables

Středící kolečko Aurapol filamentspool

Doporučuji vytisknout dvě nebo upravit šířku, dle libosti. Ukažte mi prosím své výtisky a podělte se o to, jak se vám model líbí.

Order a print of this model

Printables

Einfacher Adapter: Filamentspule zum umspulen mittels Akkuschrauber / Simple Cone: Filamentspool rewinding with screwdriver

Kegel für eine 10mm Gewindestange z.B. zum umspulen von Filamentresten mit einem Akkuschrauber. Benötigt werden 2 Kegel (siehe Bilder) Schichthöhe: 0.24mm, PLA Infill: 25% Cubic je 4 Schichten (Wall, Top, Bottom) Durchmesser: ca. 52mm bis…

Order a print of this model

Printables

Filamentspoolholder for Networkracks

I made this Filamentholder (1Kg) for my Networkrack. It fits exactly for the cage nuts distance. I've used PETG with 25% infill.

Order a print of this model

Printables

IKEA Bror FilamentSpool Mounting System

Mounting system to mount your filament spool inside a IKEA Bror cabinet in the corner and in the center. I wanted to mount two filament spools to my Bror cabinet and saw the design of McVolta . However I wanted to use the Filler Filament…

Order a print of this model

Printables

Filamentspoolholder / Filamentrollenhalter

Habe für mein Filamentlager zwei verschiedene Halter für die Wand-/ Bodenmontage designt. Die Montage erfolgt mit M5 Senkkopfschrauben.

Order a print of this model

Printables

filamentspoolholder for Prusa Core One

I designed this filament spool holder so that I could use an additional spool. In my case, it was a spool of TPU 85A, for which I wanted to bypass the side filament sensor and ensure a more direct filament feed to the print head. The…

Order a print of this model

Printables

Filamentspool holder

Order a print of this model

Printables

Adapter REAL_filamentspool - Filament Storage 2026

Created adapters for two REAL_spools, with widths of 66 and 41.

Order a print of this model

Printables

Adapter Spectrum_filamentspool - Filament Storage 2026

Made two adapters, one for the left and one for the right, to fit the Spectrum PETG premium spool.

Order a print of this model

Printables

FilamentSpoolHolder for InomataK Dry Food Stocker

[概要] イノマタ化学乾物ストッカー6.0に入るフィラメントスプールホルダーですフィラメントの使用量を極力抑えてありますので、軽量かつ短時間で印刷できます組み立てにはM3ねじを使用しますが、自己成型ネジ穴になっていますので、ナットは不要です [部品表（印刷数量）] InomataKv3g-AxisInner_BottomRing.stl × 1 InomataKv3g-AxisInner_HydrometerHolder.stl × 1…

Order a print of this model

Printables

Double Filamentspoolholder Wall, Shelf

Filamentspoolholder for wall mounting. A round log with a max. diameter of 30mm can be placed in the holder. Thus, filamentspools can be flexibly mounted on shelves and/or walls. The filament can be changed at any time due to the…

Order a print of this model

Printables

FilamentSpool to Mini Power Cable Rheel

This is a WIP.

Order a print of this model

Printables

Filamentspool tensor for Prusament

The clip prevents the filament for unintenional unspooling and later problems during the use. This littel part is designet for the ‘Prusamentspool’ with a wallthickness of 4.5 mm and a 1.75 mm filament. Press the clip on the spool and…

Order a print of this model

Printables

Mini filamentspool Doorknob

Remixed the model to add a small backplate with a 3mm hole to work as a doorknob. Printed as 3 parts so the filament has another color.

Order a print of this model

Printables

Filamentspoolholder on Voron 2.4 using Prusa org. Holder

A re-routing of filament through "" the rolls required higher position. As I still had my org. Prusa filament rolls holder I just needed to design a block fitting on the 20x20 Voron 2.4 profile and the Prusa roll holder fitting my design.…

Order a print of this model

Printables

Desicant box for Filamentspools with Hygrometer

Simple and quick print in PLA Desicant tube with thread to keep silica inside Used Hygrometer: https://de.aliexpress.com/item/33037396704.html?spm=a2g0o.order_list.order_list_main.107.764c5c5fJfjyZ7&gatewayAdapt=glo2deu Just cut the…

Order a print of this model

Printables

Simple Filamentspool Holder

For spools with a 20cm outer diameter. Printable without supports. Fits on the bed of the MK3, just rotate it. Printed mine with a layer height of 0.3, which took about 4h on the MK3.

Order a print of this model

Printables

Filamentspool holder

This is my version of a filament dispenser, I use this for my dry box, to rebuild this you need 4 ball bearings 22x7x8 and a few M3 screws the holes are designed so that you can use any screw up to a length of 30mm. But I use only 8 times…

Order a print of this model

Printables

Modular Filamentspool-Holder - NO SCREWS

This is a very simple modular Filamentspool-Holder. You don't need screws. Only 4 608 Bearings are required. I should fit almost every spool on the market. Make sure your printer is calibrated correctly, fittings are very tight! Have fun…

Order a print of this model

Printables

Cardboard Filamentspool Adapter (MK4 Upgrade)

Based on the design of EdlefVanEdlefsen , i've made this sligthly changed Version, optimized for Prusas standard filemantspool holder. Features/Function: a little more easy to attach and detach to/from spool slightly smaller inner…

Order a print of this model

Printables

Simple Filamentspool Rewinder One-Fits-All

A simple filamentspool rewinder for most spool seizes and drills. Inspired by other designs but more massive. I printed mine in PLA, 20% infill, the rest is up to you. You need: -eather a 6mm threaded rod or 8mm one -two nuts, depending…

Order a print of this model

Printables

Filamentspool Stopper / Filamentspulenwegrollstopper

I store my filament spools in a shelf. So they must be fixed to prevent rolling around. Best printed with flexible filament.

Order a print of this model

Printables

CUSTOMIZABLE-FilamentspoolRack

A FilamentSpoolRack which uses a 33,5mm Stick from old tools like a Shovel to store your Spools The Rack can be as long as you want, depending on the length of your available stick You have to put one of the Parts on each end of the…

Order a print of this model

Printables

CUSTOMIZABLE-FilamentspoolRack for a cabinet

FilamentspoolRack for a cabinet to replace the normal cabinetfloors It ses the pins which are already in the cabinet to secure itself in the cabinet You can adjust the length of these Rackparts to the distance of your pins to get the best…

Order a print of this model

Printables

Filamentzuführung für präzisen Filamentspooler / Filament feed for precise filament spooler

for English Documentation and Video see below Achtung: es gibt ein Nachfolgemodell: einfacher und flexibler: https://www.printables.com/de/model/853272 Diese gebremste Filament Zuführung passt unter anderem zu meinem Filamentspooler . Sie…

Order a print of this model

Printables

Flexible Filamentspool Holder for The 100

I used an external Filament Spool Holder for my The 100, but it is always in the way. So I decided to create a flexible one which is mounted at the frame at my The 100. The flexibility is that you can use the filament handle cross side to…

Order a print of this model

Printables

Refill Filamentspool

Filamentspool to refill

Order a print of this model

Printables

Refill Filamentspool 9e7

Filamentspool for refill (nicht verwirren lassen 9e7( 9Eck7mal) ist nur meine Modellbezeichnung zur Unterschiedung)

Order a print of this model

Printables

Filamentspool weight

Filamentspool weight i filled my with sand

Order a print of this model

Printables

Refill Filamentspool 2.0

Neuer Versuch einer Filament Spule zum Nachfüllen ^^

Order a print of this model

Printables

Holder for Filamentspool very simple but nice

This simple Spool Holder is designed for all Printers with 40x5mmFrame, like MK3-4 Just under 20g Filament but strong! Designed to fits directly on the frame and the enclosure space can be kept very small. You just need 4x 608 Bearings…

Order a print of this model