Filamentspool tensor for Prusament
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.64 – €0.78 net (excluding VAT)
For file: Filament_Holder_4mm PETG_MK3S_58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 57.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This clip prevents unintentional unrolling of filament (Prusament)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The clip prevents the filament for unintenional unspooling and later problems during the use.
This littel part is designet for the ‘Prusamentspool’ with a wallthickness of 4.5 mm and a 1.75 mm filament.
Press the clip on the spool and insert the filamet.
I have used some support between the opening of the left side.
I have added two new files for clips with a diameter from 3.0 mm. This clip fits good at a ‘Amazon Basic Filament spool’.
I have designed the clip with Fusion 360.