High friction washer - Playing Card Shuffler V3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A high friction enhancement washer for the Playing Card Shuffler v3. Use the softest flex you can TPE83 not TPU95
- Rating
- 4.333 / 5
- Likes
- 1,335
- Downloads
- 2,770
- Makes
- 3
- Views
- 40,643
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky
Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com >
As with many innovative solutions there can be limitations. Where you are trying to shuffle either, very new cards, very smooth/shiny cards, or even where you are trying to shuffle a double pack of cards such as used in a very common number game; the level of friction from the originally specified 8mm OD x 2mm W plumbing washers was insufficient to grab and move an individual card from the bottom of a stack.
This was either because of lack of traction on the card or because of higher mass bearing down on the card.
My solution is to create a 4mm crimp edge washer that simply retro fits to the original Playing Card Shuffler V3 spindles (inner diameter of the washer is chamfered back to 2mm). A rough calculation suggests a x8 increase in contact friction over the original washer. I printed in the softest flex I had (TPE 83a shore). No supports required. Very dry filament required. I printed on a 0.15 layer.
With this minor tweak the V3 shuffler seems able to handle anything thrown at it, or indeed on to it.
Great design Lukas, thank you.