Counting matching models…
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
This is not really a remix, this is simply a translation of the file names and instructions for the Playing Card Shuffler by farfadet53. I have not yet printed this myself, once I do I will update this thing with photos. If it doesn't…
Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…
Print as you normally would. I used PETG @.2 layer height with .4 nozzle. They should be glued in place on the original model directly above the center of the roller. Thanks for the original model @LukasCenovsky
Took the OG card shuffler and simply made it a little bigger so that you could one-handed shuffle an entire sleeved commander deck. No supports needed. Feb 2024 update: Based on a great suggestion by @SaschaSpieker_445421 in the comments,…
Inspired buy the gorgeous wood version available at Wheel Fanatyk: https://wheelfanatyk.com/collections/lacing/products/wheel-fanatyk-nipple-shuffler (if you build wheels, you will definitely want to read Ric's awesome blog, which you can…
I have several expansions for Dixit and the cards are too large and cumbersome for my hands. This is a remix from both Lukas Cenovsky's and LightValen's shuffler and cogs. I increased the angle of the card feeder and changed the overall…
Updated on 12/22/22 Filleted the corners to make it nicer to carry without pointy edges and to make it easier to print. Updated on 9/23/22 After receiving feedback, I have updated the file to make the shuffler much easier to use and is…
97x71 version of the original project
I've recreated the single TPU O-ring because you only need 4 + the 2 wide rollers.
O-ring for the shuffler, in case you want to try to print it in TPU. I've gotten decent results with 95A TPU, but it's possible other materials might be a bit better (chime in in the comments if you have any suggestions!
These are simple o-rings created inside PrusaSlicer. I made them slightly larger than the o-rings Lukas used. They are 12.5mm diameter inside and 19mm diameter on the outside (2mm thick). Printed w/ 100% infill with a 0.6mm nozzle, they…
Edited the shaft so that it works with small ~1.5 cm (~0.6 inch) rubber bands. Works great. Thanks to @LukasCenovsky for doing all the hard work and then sharing the scad file to make this possible.
This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…
this is a super simple remix of a remix. I took a spacer from a v2 remix ( https://www.printables.com/model/391943-card-shuffler-for-mysterium-and-dixit-sized-cards/files ) & resized it to fit this V3 Crank to help keep the gear from…
!!! I made this remix from the 93x71 files, please make sure the gears fit on other sizes!!! There are 2 different nuts, I think you only need one of the smallest for the handle shaft Make sure you have your tolerances tuned!
This is a wider version of the "cut-out" remix of the "Spielkartenmischer / Card shuffler" to support wider cards such as standard width "Bicycle" branded playing cards. I've also included a slip-on ramp for each side table that…
A neighbor lost the plastic tray that went inside the automatic card shuffler we always use to shuffle cards with. I took measurements, designed a replacement, and printed it. Now you can use it too! Features Fits most automatic card…
This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…
This remix adds fillets to the edges of the shuffler to reduce the chance of warping during printing. Otherwise it's identical.
A small adapter that fits into an automatic card shuffler, allowing it to shuffle mini (44x68mm / 1.73 x 2.68in) board game cards. Useful for Ticket to Ride , 7 Wonders: Duel , or any other game that asks you to shuffle those awkwardly…
My kids broke the crank arm off my card shuffler which I like to use for deck builders (especially when you are trying to shuffle only 10 or 12 cards at a time). So I measured the pieces and used my poor CAD skills to make a new one. This…
This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.
This is an an adapter that keeps smaller cards (in this case, Wyrmspan cards) from rotating and getting caught up when being shuffled using a hand cranked automatic shuffler. This isn't a perfect solution, but works well enough. The…
If you've had the experience of trying to shuffle your 100-card double-sleeved Commander deck and spraying your cards all over the table and floor, this handy little aid can help prevent that from happening again! Currently on iteration 4…
This is a carry / storage box I made for the Card Shuffler by Josh-3D . Shuffler, This box fits the tall shuffler, so it will work for both the tall and standard shuffler. I suggest printing the box using PETG or better for durability. I…
It’s a replacement tray for this card shuffler I bought for $0.25 at a garage sale a decade ago. Category: Toy & Game Accessories
These cheap manual card shufflers are all over Amazon and they work well - for as long as the crank handle lasts. One extra handle is provided, but even so the handles break before very long. The shuffler itself will last a much longer…
I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…
I have modified the Card Shuffler Conveyor Wheel to fit for 32mm x 3mm O-ring seals.
A shuffler mechanism is a fun, unique, and lightweight way to add motion to your robot or other projects. It uses a drive cam system to move feet in a heel-toe motion for propulsion. There isn’t a lot of documentation about this, so I…
This bicycle wheel nipple shuffler has minor updates and is based on the Wheel Fanatyk original. I printed it using Inland PLA with great results. No supports or hardware needed.
The clear plastic tray that holds the cards in our card shuffler broke. I designed a replacement that fits well. I printed in PETG because that what was loaded into my printer at the time but really anything will work. I printed on it‘s…
Additional part for crank arm to make it spin easier No supports, print vertically Takes about 10 minutes to print and you have to push quite hard to get it on, but it will not come off afterwards.
Modified parts for the awesome manual playing card shuffler from user RockstarAlchemist. The goal of this remix was to reduce the amount of plastic needed, also to help make the shuffler a bit more efficient --6-5-17-- Added a modified…
This crank improves the usability of the Amigo Card Shuffler since it features a rotating handle with knurled surface or can be used as replacement part. It also might fit to similar machines of other brands. The axis is 4,3 mm square. It…
Kids = lost pieces… after getting frustrated that the batteries kept coming loose while shuffling cards I designed this battery cover. Printed using just PLA and .4 nozzle and .20 height and normal supports. V1 works… when it breaks I'll…
Family game night was saved using Spencer's crank model ( https://www.printables.com/model/872475-card-shuffler-crank-arm ), but couldn't resist making a few usability tweaks! I shortened the main crank shaft a little because my hand kept…
This is a shuffler mechanism designed to fit on REV c-channel and use their HEX shafts.
Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: hole_diameter = 2.39 no_angle = .1 tip_height =…
I play UNO and Five Crown via Tabletop Simulator. When I play IRL with friends and family, it is tedious to deal and shuffle. Especially Five Crowns. My spouse came across the ShuffleBox G1 PRO 2025 and I purchased one immediately.…
ARRCO HAND CRANK CARD SHUFFLER CARD DRAWER. I don't know if it will work with the battery powered version. V3 :I updated it a little, the cards were falling out because the back wall was to close. So this might work better for you, if the…
Customized version of http://www.thingiverse.com/thing:54395 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=54395 Instructions Using the following options: no_angle = 1 cog_tip_width = .6…
After a few failed attempts at printing the CardGuide file, I zoomed in on the model and saw incomplete areas that were causing the failures when I sliced with Prusa Slicer. This file is a simple hack and bash correction that allowed me…
I really liked the nippleshuffler by Lexapskov (https://www.thingiverse.com/thing:4605923) but the print turned out a little flimsy for my clumsy hands. So I added a little strengthening.
My card shuffler's crank broke by accident. Rather than buying a new shuffler, I was lucky enough to find a crank design. However I soon realised that the shuffler would work better with a key mechanism so I combined the following models…
Keeping this shuffler running by printing out a new card tray.
Took Doc Peppercorn's updated model, which is also a tray, and modified it slightly. You can still one-handed shuffle an entire sleeved 100-card Commander deck. But its overall dimensions have been reduced slightly so it will fit in the…
A replacement card tray fitting a common manual, plastic card shuffler. After losing our original card tray (how does that happen?), and continuing to use the shuffler, spewing cards everywhere or jamming, I decided to go ahead and make a…
A hand-crank card shuffler for family card and board games. Put half a deck in each tray, turn the crank, and the cards drop one by one, alternating, into the middle. One crank drives both rubber wheels through a real involute gear train,…
One-handed Card Shuffler sized for standard 52 deck size, but will work for euchre deck (24) or 40 or so sleeved cards. Works well placed on table or cradled in other hand. Larger deck sizes available soon. I included solid model to make…
This is a replacement drawer / tray for a common card shuffler. I printed it in transparent PLA which gives it a nice look. If you like my design, please rate it, give it a like and probably post a make. Thank you!
I was paying cars one time and the card shuffler tray dropped and shattered. I ended up making a 1 on 1 perfect fit for the original tray that shattered. I highly recommend petg at 100% infill but pla at 100% infill also still works just…
Family game night was saved using Spencer's crank model ( https://www.printables.com/model/872475-card-shuffler-crank-arm ), but couldn't resist making a few usability tweaks! I shortened the main crank shaft a little because my hand kept…
I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…
