1 / 2
TPU O-Rings for Playing card Shuffler V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't have o-rings, so I wanted to try to print them in TPU. Solid SainSmart TPU o-rings seem to work well enough.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 351
- Makes
- 8
- Views
- 3,090
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
These are simple o-rings created inside PrusaSlicer. I made them slightly larger than the o-rings Lukas used. They are 12.5mm diameter inside and 19mm diameter on the outside (2mm thick).
Printed w/ 100% infill with a 0.6mm nozzle, they work pretty well.
UPDATE: Added a photo of the slicer stuff since the 3MF shows solid cylinders for some reason