Counting matching models…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Looking for a deck of cards that fit into an Altoids tin? Find it here: https://www.printables.com/model/1115163-altoids-friendly-playing-cards Based off my design for Altoids-sized cards, I decided to also create “standard sized” cards…
A playing/collection cards case that closes on itself like a book. Made to hold a deck of 25/30 collection cards (with 66x91mm Ultra Pro sleeves). Print-in-place design (no assembly required). No excessive overhangs (max. 35° on conical…
Box for CorrectBook Flashcards For who does not now: CorrectBook sells reusable ‘paper’ things like notebooks, calendars, shopping lists and Flashcards. The paper is laminated with some plastic. using some kind of whiteboardmarkers you…
Hello, friends. I created a design organizer for usb/memory cards.
Feed your OCD with these drawer/cabinet labels. D-## are for drawers and C-## are for cabinets. Print the raised letters with a different color for better appearance.
I wanted some matching cards in order to help my students work through decimal and binary conversion. These little cards are a great, permanent resource for helping students learn. I can see two games to play with these cards: Matching -…
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
Good day, dear friend. You can find two versions of the tray. In version 2.0, the destruction and sick people chips are combined with the sick people figures, I found it more convenient. But there is also a place for the destruction and…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
Yet another box for game cards such as Pokemons, Yu-Gi-Oh! and may be others. I call it "boring" as it does not have any buttons, locks, gears, bells, whistles etc as other game card boxes. Just a large box with lid and spacer. It can…
Looking for a deck of cards that fit into an Altoids tin? Find it here: https://www.printables.com/model/1115163-altoids-friendly-playing-cards Based off my design for Altoids-sized cards, I decided to also create “standard sized” cards…
An insert that fits neatly into the main box of Cthulhu: Death May Die - Fear of the Unknown and holds all the cards and tokens. There is some room left for extra cards. It fits the relics, insanities and mythos cards sleeved (I use…
I had a rather specific size need for a commander deck box that didn't seem to exist, so I made a rather basic one that fits those needs perfectly. Not the prettiest box to look at but it holds 100 cards (double sleeved will not fit) + up…
This compact box can snuggly hold a sleeved deck of 100 TCG standard sized cards (2.5 in x 3.5 in / 6.4 cm x 8.9 cm), with an additional space for tokens, dice, etc. There is an optional basic box version with no divider that can be…
Intro Add a personal, heartfelt touch to your projects with these 3D-printable LOVE stamps ! This set brings charm to handmade cards, letters, gift tags, journaling, packaging and creative crafts — making every message feel extra special.…
Nintendo Switch video game storage for 12 boxes and 6 cards.
3D-Printed Referee & P-Cards for Fencing Print your own referee cards and P-cards for fencing! Standard soccer size 75 x 105mm. 1mm thick for rapid printing but sturdy enought for tournament use. Material Options You can print them in PLA…
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
I remixed the model to have the inner dimensions of 64.1 x 90 x 19.8 mm, which perfectly fits my set of French-suited playing cards, which should be the standard size. I did this because for me, the original was a little bit too large to…
A clean minimalist box to store and display your business cards with 8,5 cm length and 5,5 cm width.
I used https://makerworld.com/en/makerlab/parametricModelMaker to make a simple deckbox for sleeved Daggerheart cards
Needed a way to transport my cards, and nothing is better than Whity's rugged parametric box! This has been altered to accomadate my Gundam Card Game Dice and Token Organiser and a card holder included in this upload. The card holder has…
A simple plate model designed to hold six aluminum business cards for engraving. The cards are intentionally offset from the plate’s horizontal center, allowing the use of autofocus during engraving. Initially, I encountered issues with…
Display stand designed for SHORT cards for Matchbox, Hot Wheels and all other model cars on short cards. As you can see on the pics the stand is 25° sloped to the back which proovides a good hold and the clips leave enough space to read…
Display stand designed for LONG cards for Matchbox, Hot Wheels and all other model cars on short cards. As you can see on the pics the stand is 25° sloped to the back which proovides a good hold and the clips leave enough space to read to…
This is an insert for The Lord of the Rings: Fate of the Fellowship board game. It keeps the original cardboard insert but adds boxes to organize the components that otherwise would be stored in baggies loose in the box. This insert IS…
Do you also have a card game but your box is broken? Here’s the perfect case to keep your cards safe. Also fits perfect for the famous card game with the three big letters. Made for 112 cards. Enjoy!
want a cool box but don't have an MMU FIXED that problem with this multi-part print just print and assemble!
A card stand used to hold up cards, easy to print and looks pretty cool. Check out my other models! use the 2mm version, it is better for holding cards, but if you're using something thinner like paper, then use the 1mm.
Elevate your laser engraving workflow with this WeCreat Lumos Business Card Jig , designed to engrave three business cards at once with precision and speed. This jig is engineered to fit securely into the WeCreat Lumos void , ensuring a…
קופסה לכרטיסיות "עליות לתורה" - Box for "Aliyat Le Torah" cards: https://www.printables.com/model/1350246-torah-aliyah-plates-set-khrtysyvt-lyyh-ltvrh-lbyt you ask, i create. never tested. please upload “make” if it works for you fine.
A simple deckbox, fully printable in 3 pieces. Is not held together by friction, or by parts that wear down over time. It is made from three interlocking parts, where the front face is designed to make a Magic the Gathering creature fully…
This is a carrier for several decks of playing cards. The inner tray comes out so you can draw from all sides. The box holds my stuff at the table so it isn't all spread out.
Super quick swatch print. The card holder can be duplicated and added to the sides of the model for more space. Great for project planning and keeping track of filament colors. The cards are great for testing filament parameters, epoxy…
An insert I created for Tenpenny Parks by ThunderWorks games.
Hanafuda, or "flower cards," are traditional Japanese playing cards featuring 48 cards divided into 12 suits, each representing a month of the year with distinct floral, animal, and natural imagery. Used for various complex matching games…
EN: Insert for Wyrmspan + Dragon Academy with sleeved cards (sleeves for cave cards were cut - 58 mm in hieght). I added some filling parts to set perfectly in the box (simple boxes, placed mostly upside down). You will need some parts in…
Box for lego minecraft cards. Can contain approximately 70 cards. Boite de rangement pour cartes lego minecraft. Peux contenir environ 70 carte. Dimensions : 100x75x45
A custom bracket to mount x16 PCIe cards in the Supermicro Microcloud 5037MR-H8TRF (X9SRD-F and X10DRD-F Nodes) Required parts M4x5mm Truss-head screws - https://amzn.to/4arJtzR WLGQ PCI-E X8 Riser Card - https://amzn.to/4apY8eS
Simple insert for game Trails with sleeved cards. Jednoduchý insert pro hru Parky: Na cestách s obalenými kartami.
Je vous propose un insert pour le jeu "POSTCARDS" avec toutes les extensions, les éléments de jeu deluxe ainsi que les cartes protégées. 21/03/2026 : Mise à jour du support pour maintenir les boites joueurs . N'hésitez pas si vous avez…
Discord: https://discord.gg/nJvfCKD2jx a community Server to chat share projects etc. Origin: I call them ColorCards cause they show you the color of your filament Holder: there is a single verison with 6 slots and an expandable version…
Building a house of cards is a fun challenge that most of us have tried before. I wanted to capture the simplicity of that, with a little sprinkle of design and ease of use. What if I can make it just a little bit easier to build, while…
EN This is a simple two part case for playing cards. Pack height max 11 mm. Size of the card 61x103 mm (Dino Toys size). Designed to be tight fit, but may wear over time so may become a bit loose. Tested with 0.15mm layer, 0.2mm layer…
This is an insert for the card game The Crew: The Quest for Planet Nine. The insert fits sleeved cards. I am using am using 100 µm thick sleeves (Dragon Shield). The insert offers space for tokens, that are enhanced by token cases such as…
PLA oder PLA+, drucken, fertig
Designed to hold one Skip‑Bo card set with plastic sleeves. There are indentations on the inner walls, so the game manual will also fit inside the box. There are holes at the bottom and at the end of each section, which, in my opinion,…
I recently got expension to SETI board game. I already had an insert for game pieces but with all aditional cards it no longer fits the base game box. I designed some insert to put all of the game cards inside the expansion box. Cards are…
I’ve never been able to build towers with cards. I hope this will afford all of us a chance to enjoy card stacking with greater success. The box should hold thirty cards, ten in each slot. Try three different colors or more. It’s your…
A small SD / SDXC card stand for 5/10/20 cards. Prints easy and gets the job done - you can sort cards between backuping them :) Printing Notes Print in PLA or PETG No supports! 0.15-0.20mm layer Quick, simple, and practical little model
An organization solution for Twilight Imperium 4th Edition + Prophecy of Kings + Twilight's Edge expansions that supports sleeved cards. Borrows a few models and inspirations from leeoneil's solution. Box lift is likely going to be about…
Role cards with flaps to hide the contents, as a multicolored 3mf
This is a remix of SamK3D’s “Rugged Box for Monopoly Deal” . The original design is excellent, but I found the base was not deep enough for newer Monopoly Deal editions (110 cards) , including the Quick Reference cards , and the hinge…
I wanted to have a place to store 2 decks of playing cards to use when playing poker of other card games. it features a slot and groove locking mechanism to keep the top on even when upside down. ---UPDATE--- 27/02/2026 Added two more…
Made this to store playing cards from various games. 1st version is made to fit standard playing cards - cca 90 x 64 mm 2nd version (visible on photos) is made to fit cards with card sleeves - 94 x 67 mm
It's my first Gridfinity project, if you want to, can you send me a picture of that creation printed and tell me if it is fully functional ! Thanks !
My dad wanted a new case for his 2 Canasta decks, so I made a simple design that doubles as a case and playing tray (so that you can play with the wilds). The tolerances are a bit tight purposely, I didn't want the lid to pop off easily.…
1.2 Update: fixed corners and length of the top and bottom tabs. Wanted to store my old Pokemon TCG cards in nice boxes instead of being tied by rubber bands. Found this design and remix but they are a bit loose and the coin design…
I like to put up cards I've received on a shelf above my desk, but I don't like that it blocks my view of the items on the shelf. To solve the problem, I designed these hangers (based on the "Wall Paper Clip" by @primo) to allow cards to…
This is a single‑piece insert for the Virus! card game with Virus! 2, Halloween and Virus! Roll & Write, designed for sleeved cards. The base Virus! deck is split into two longer compartments, Virus! 2 has its own section, and Halloween +…
Recently opened up some Energon Universe Kayou trading card packs and got theses impressive logo-shaped lenticular transformers cards! Thought they would look great as standee pieces for the collection, so here we are! These stands allow…
A box to hold all cards of the HeroQuest base game with the cards in Dragon Shield sleeves
This is an organizer for the board game Graft by IV Studios. It supports sleeved cards, but specifically Dragon Shield sleeves . I'm sure other sleeves would work, but I couldn't account for them as the margins in this box are very tight.…
Modified some dimensions to make this suitable for sleeved cards
This project is a 3D printable deck cover designed specifically for standard Napoletane playing cards with dimensions 53 x 84 mm. The cover protects the deck while maintaining a lightweight, breathable, and visually distinctive design…
Need space for Commander Decks and Playmat in your Stanley Toolbox? Look at my solution. Works for me perfectly over month
Box for your Dices or small parts like Counter or what else. I use this Box for my +1/+1 and -1/-1 Dices.
Have you ever been in a situation where you thought "oh i wish i had a card, that i would just pull out". That is now possible! !Print instructions!: keep the orientation In the model are included two squares. Do NOT remove those, if you…
If you run an xTool F1 and you’re tired of wasting time on alignment and one-at-a-time engraving, this set is built to speed up your workflow. The xTool F1 Core 4 Jig Set covers the most common day-to-day jobs for laser enthusiasts—so you…
The Book file should be printed with a brim in the orientation the file comes in. Supports are not required, but it may turn out better with them. The Pages file does not need supports or brim. This only looks like a book, it does not…
No support needed. Print the lid upside down and everything else with normal orientation You can use the pins or 6x M3 30mm screws
Like a normal deck of card but looks modern - and 3D printable Card value indicator 1-10 indicated with bars and number JQKA indicated by 1-4 outlines 4 symbols 4 colors heart ↦ Ring diamond ↦ Quad club & spades ↦ X (cross) & TRI (triangle)
These 3D-printable Aliyah cards are designed to help streamline honors during Torah reading while adding a clean, organized, and respectful look on the bimah. Each card clearly designates an Aliyah in English and Hebrew, making it easy…
This dispenser can hold all your Zoo cards (including those from the Marine Worlds expansion) during and between your games. If you are using sleeves, please ensure than your stack of sleeved cards does not exceed 15cm in length. I use…
There is one of everything except for the mat component which needs 2x (labeled as 2x). The title of each file should represent what I store in each, but nothing is too tightly confined that you can't find a layout that makes sense to…
Hey, ich habe eine Box entworfen, in der ich meine Pokémon-Karten mit den Card Covers schön lagern kann. Ich habe sie so gezeichnet, dass sie auch auf dem MK4 und MK4s gedruckt werden können. Außerdem arbeite ich noch an einer Variante…
Video here! Check out the tokens/case here A version of the smuggler's bluffing game 'sabacc' - a quite fun improvement on poker that, in my view, provides a bit more player agency and some interesting opportunities for more deception AND…
The Odalin core box's card tray isn't large enough for all sleeved mini-euro cards, even when using the sleeves bought in the crowdfunding campaign for the game. This replacement tray adds an extra mini-euro row to accommodate for all the…
Want to add your own original characters to PrintAQuest? Now you can using Tinkercad! Start here: https://www.tinkercad.com/things/kbSKt7IrLR5-printaquest-character-base-printablok
A compact, snap‑latch storage case designed specifically for standard playing cards. Please like if you download or print it! The internal volume is 20 mm (W) × 65 mm (L) × 90 mm (H). It fits standard cards very well, leaving about 1.5 mm…
I added a little tub in the back of the toaster to hold another chip
This is a balancing game heavily inspired by Cards vs Gravity. I couldn't get that one in my town, so I modeled and printed it. Needless to say, since it closely resembles the real board game, the files and prints should be only for…
Das Alphabet (The Alphabet) Update 2026/03/11: Added small letters as @Cryptomon_4223491 asked for. Files for Bambu Studio and Prusa Slicer are included as well. My daughter lost some of her beloved wooden alphabet learning cards and I…
Insert / Organizer for Port Royal with Sleeved Cards. Fits in the original box. Designed against: Port Royal English/German second edition (2015) published by Pegasus Spiele Sleeve Kings Standard Euro Premium My printer details:…
requires: 8 10x3mm magnets - https://www.amazon.com/dp/B0C697TTK4?th=1
A 100 card deck holder with a display slot for your Commander. Holds sleeved or unsleeved cards. Category: Games
Holds 4 decks of half-sized playing cards. My daughter has a Kid's Jeopardy game that has 4 decks and it comes in a simple box that does not keep the decks separated.
Remixed model from Bmorr and nFinity. Added 2cm space for tokens. Model accepts 12 5*2mm magnets press fit. Depending on your printer small dab of glue may be needed. Commander slot designed for top loader hard sleeve (although dragon…
The hero dashboards being sold by Ares Games for Sword & Sorcery unfortunately were either not tested for sleeved cards or the defects were ignored after the initial production. The card wells are slightly tapered thus the weight of the…
A desktop dispenser for these poly bags. Made for someone who works in a collectibles shop and needed a handy way of storing and dispensing these small bags.
Hello, Sharing my project of simple stand/holder for 15 SD cards :) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
![[Gridfinity] 9 SD Cards holder 1x1x4](https://media.printables.com/media/prints/5a19467f-5506-4c8b-90ed-faf20a92c4b6/images/11900365_e2b36cdf-dda2-4aca-8547-f06d9aba999b_899b8b5a-a73f-4511-80ce-8ffa7ba94056/with-sd-card.png)
