1 / 3
Prusa Mini Business Cards Holder - 3D printed 3D printer printing business cards — image 1
1 / 3

Prusa Mini Business Cards Holder - 3D printed 3D printer printing business cards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Show off your love of 3D printing with this business card holder!

Rating
4.957 / 5
Likes
626
Downloads
756
Makes
28
Views
8,970
Reviews
23

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Show off your love of 3D printing with this business card holder!

 

💪 The holder can accommodate ~7 cards of various sizes - tested 90x50✅ and 85x55✅

 

😍 Simple and fun assembly! 

 

🟠You will need (but feel free to freestyle!):

  • Black PLA filament
  • ~2.7m Orange PLA filament (an old sample is a perfect amount)
  • ~0.5m Silver (or White would be also fine) PLA filament
  • ~8cm of White filament (any type really, I used PETG)
  • ~20cm of Black filament (I also used PETG, but feel free to use the same PLA as for the other parts)

 

 

🟠Print setup:

MaterialPLA 
Perimeters2Can be 2 perimeters for all the models, 
but for the ultimate fidelity, set it for the 
2 silver layers to 4 Perimeters. The rods 
will appear smooth 😉 

(or a lazy solution would be to set perimeters 
to 4 for the whole “Frame” model)
Layer Height0.2 mm 
Nozzle Diameter0.4 mm 

 

 

🟠Printing instructions (.3mf files - Prusa Slicer):

  1. Print the “Frame” file
    1. Start with Black filament
    2. Switch to Silver/White filament
    3. Switch back to Black filament


       
  2. Print “Black” file
    1. Print everything with Black filament


       
  3. Print “Orange” file
    1. Start with Orange filament
    2. Finish the Knob with Black filament

 

🟠Assembly:

  1. Put all the pieces together




     
  2. Cut ~8cm of White filament and bend it to the “U shape” - insert one end into the “Extruder” (this locks the piece to the “Frame”) and the second to the “Hotend” (on the left - the hole that goes through) and let the piece of it protrude from the bottom
     
  3. Cut ~18cm of Black filament and bend it to sort of a “C shape” (this part needs a bit of experimenting). Fit one end to the “Extruder motor” and the second to the “Hotend” (left side)

 

🟠Adjusting for different card sizes:

The LCD Screen is pressure fitted - it can be moved up/down and back/forward - adjust for the perfect fit. Tested with cards 90x50 and 85x55

 

🟠If things don't quite fit:

All the mating surfaces are designed with tolerances in mind - if something does not quite fit, you can use a file to either enlarge (hole inside the “Extruder”) or shave down ("Frame"'s “Y-Axis”, “Bed protrusion” or “LCD holder”)

 

Please share your prints and let me know if you need any changes - I'll be happy to help!

Happy printing!

Tags