Prusa Mini Business Cards Holder - 3D printed 3D printer printing business cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Show off your love of 3D printing with this business card holder!
- Ocena
- 4,955 / 5
- Polubienia
- 624
- Pobrania
- 756
- Wydruki
- 27
- Wyświetlenia
- 8957
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Show off your love of 3D printing with this business card holder!
💪 The holder can accommodate ~7 cards of various sizes - tested 90x50✅ and 85x55✅
😍 Simple and fun assembly!
🟠You will need (but feel free to freestyle!):
- Black PLA filament
- ~2.7m Orange PLA filament (an old sample is a perfect amount)
- ~0.5m Silver (or White would be also fine) PLA filament
- ~8cm of White filament (any type really, I used PETG)
- ~20cm of Black filament (I also used PETG, but feel free to use the same PLA as for the other parts)
🟠Print setup:
| Material | PLA | |
| Perimeters | 2 | Can be 2 perimeters for all the models, but for the ultimate fidelity, set it for the 2 silver layers to 4 Perimeters. The rods will appear smooth 😉 (or a lazy solution would be to set perimeters to 4 for the whole “Frame” model) |
| Layer Height | 0.2 mm | |
| Nozzle Diameter | 0.4 mm |
🟠Printing instructions (.3mf files - Prusa Slicer):
- Print the “Frame” file
- Start with Black filament
- Switch to Silver/White filament
- Switch back to Black filament

- Print “Black” file
- Print everything with Black filament

- Print everything with Black filament
- Print “Orange” file
- Start with Orange filament
- Finish the Knob with Black filament

🟠Assembly:
- Put all the pieces together


- Cut ~8cm of White filament and bend it to the “U shape” - insert one end into the “Extruder” (this locks the piece to the “Frame”) and the second to the “Hotend” (on the left - the hole that goes through) and let the piece of it protrude from the bottom
- Cut ~18cm of Black filament and bend it to sort of a “C shape” (this part needs a bit of experimenting). Fit one end to the “Extruder motor” and the second to the “Hotend” (left side)
🟠Adjusting for different card sizes:
The LCD Screen is pressure fitted - it can be moved up/down and back/forward - adjust for the perfect fit. Tested with cards 90x50 and 85x55

🟠If things don't quite fit:
All the mating surfaces are designed with tolerances in mind - if something does not quite fit, you can use a file to either enlarge (hole inside the “Extruder”) or shave down ("Frame"'s “Y-Axis”, “Bed protrusion” or “LCD holder”)
Please share your prints and let me know if you need any changes - I'll be happy to help!
Happy printing!