1 / 7
MicroSD (Micro SD) cards case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — NoDerivatives
It is difficult to open the case, perhaps the locking protrusion should be made 0.4 mm rather than 0.5 mm. The cards come in tight, they do not fall out of the case as in other models. In the photos, the model is printed from PETG, the nozzle diameter is 0.4 mm, the layer height is 0.2 mm.