Beacon ABL Mount for Voron Switchwire w/ StealthBurner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative x-carriage mount for Beacon's eddy current bed sensor
- Ocena
- 4,667 / 5
- Polubienia
- 35
- Pobrania
- 151
- Wydruki
- 3
- Wyświetlenia
- 2462
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Remix of the StealthBurner x-carriage mount for Voron Switchwire that provides a mount for Beacon 3Ds new Eddy Current Surface Scanner.
The modification to the original from the StealthBurner GitHub repo provides a spot for a threaded insert and relief for the connector for a Beacon in “normal” configuration.
I'm printing these in IIID Max PLA+, 0.20 layer, supports only on build surface, 25% infill, with 3 perimeters and 3 top/bottom layers.
The model needs 6 threaded inserts: the original 4 plus two on the bosses on the bottom of the left and right where you will attach the Beacon using short (6mm) M3 screws. Pics coming when mine gets here and I get it installed.
NOTE: This has not been tested yet!! Design does not yet account for cable routing (USB to the Raspberry Pi running Klipper), and clearances have not been tested in the real world.
The modifications were done using the CAD model of the Beacon and Beacon's instructions.
Edit/update: My Beacon arrived this week. Fit is almost perfect. The only adjusment is that you will either need to use a 4mm button head M3 or drill the mount holes on the Switchwire bracket a little deeper before inserting the threaded inserts. I used 6mm (all I had on hand) and they were a bit too long.