Voron StealthBurner BLTouch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount intended to replace the ADXL mount.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 781
- Wydruki
- 2
- Wyświetlenia
- 3310
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
To fit the BLTouch on the StealthBurner on my BLV MGN Cube I made this simple mount. It attaches to the ADXL mount.
Set the following offsets if you use Klipper:
[bltouch] …x_offset: -40.9y_offset: -5.6…
To attach the mount to the StealthBurner two DIN912 M3x12mm screws are used and the BLTouch itself gets attached to the mount with two DIN912 M3x10mm screws as well as two M3 nuts.
This mount has only been tested with a Dragon hot end and trying to use it with another hot end should be checked in CAD first to avoid unintentional crashes of the nozzle against the bed and possibly damaging something.
Since the BLTouch sticks out to the side, the config had to be changed to home in the positive direction to prevent it from interfering with the end of the X axis mount and potentially breaking off while using sensorless homing.