Liczymy pasujące modele…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
If you find this thing useful, please consider sending a tip. :) https://paypal.me/cdsmakestuff Dual Cooling Fan Upgrade with BLtouch Mount Fits Creality Ender 3 (OG) and Ender 3 Pro Ender 3 V2 Version here Why another? Well I tried a lot…
DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…
To fit the BLTouch on the StealthBurner on my BLV MGN Cube I made this simple mount. It attaches to the ADXL mount. Set the following offsets if you use Klipper: [bltouch] … x_offset: -40.9 y_offset: -5.6 … To attach the mount to the…
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
To use this model u might have to get a slightly longer belt since the stock ender 3 belt might be a bit to short. I recommend a high quality Gates Belt. The carriage is a bit thicker than normal so you can use the hartk pcb without…
Hello, this is our Bltouch Mount for Anycubic Vyper and Kobra Plus and Max. With this board you can use the bltouch print and play (klipper): https://aliexpress.com/item/1005004281432549.html Source files:…
This is a remix of the fan mount from Baphomet. It is meant for a 5015 radial blower fan. I have included 2 different mounts, depending on the type of sensor you have. I used a 12mm (diameter) inductive probe but found it was inconsistent…
i hate documentation, will do later
Remix of the Red Squirrel fan shroud that adds compatibility with the MicroSwiss E3 hotend, DD mod and BLTouch. Remixed from RedSquirrelHobbies' Red Squirrel .
Extrusor para materiales flexibles, se puede acoplar en prusai3 o similares. Especialmente diseñado para estos materiales, la idea es dejar el menor espacio posible entre la rueda tractora y el PTFE. así impedimos que el filamento se…
Satsana Duct 5015/4010 with support to BLTouch and Pinda inductive probes remix This is a remix of the amazing Satsana Ender 3 Fan Duct by eric-anastas and max_davis's remix to support the BLTouch probe. Main enhancements of my remix:…
A tiny versatile ender 3 plotter toolhead to hold markers pens and pencils! It does need improvement, and I will work on it eventually! Don't judge me on what it drew, I'm not good when it comes to software!
This is Just a Remix of Ben Levis Mount for the Trianglelabs Matrix for BLV MGN Cube
BLtouch attachment for CPAP slide mount !!!!Tested only for Phaetus Dragon UHF!!!!
WARNING! Do not install this on a stock MakerBot Replicator! I have modified my machine and am no longer using the MightyBoard! I'm using a Creality 4.2.7 Board which supports this sensor. If you use this on the stock setup you can break…
Designed this to mount my 3dtouch the on the excellent Hotendcover remix by Danner_3D, which you may find here: https://www.thingiverse.com/thing:4788622 As light as I could make it does not obstruct the side fan excessively. Testing now…
Improved Ender 2 Pro Fan Shroud with BLTouch Mount, direct replacement for the stock shroud.
Could not fit an Hex Nut so added so i could.
This is a sort of all in one hotend shroud solution for the ender 2 pro. I remixed the bltouch mount and hotend cooling fan brackets from the linked models, and designed the adjustable part cooling fan mount myself so that I can lower the…
This is a holder for the BLTouch / 3DTouch sensor meant to be mounted behind the radial cooling fan. Initially I designed this for my Anet A8 in combination with the "Mistral 2.1a" fan duct from user Neo_N (…
This model fixes the model to prevent design flaws that inhibit printing the part. A separate version is included which is designed to improve compatibility with the TZ V6 hotend. The part was also inverted, slightly flattened, and given…
5/15/2019 edited 1.5mm higher for more probe clearence, allowing room for shims for fine tuning. Wanted my 3dtouch closet to the nozzle so i came up with this location settings X= 8, Y= -28 Category: 3D Printer Parts
Introduction: Replace the v6 hot end, optimize the internal ventilation heat dissipation, add the 3d touch installation position, the air duct can be replaced The step file has been open source, capable friends can design their own more…
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
Yet another Printable spacer kit for the BLtouch. They are stackable. 1mm = 1mm 2mm = 2mm 3mm = 1mm + 2mm 4mm = 4mm 5mm = 1mm + 4mm 6mm = 2mm + 4mm 7mm = 1mm + 2mm + 4mm 8mm = 8mm 9mm = 1mm + 8mm 10mm = 2mm + 8mm 11mm = 1mm + 2mm + 8mm…
My settings for Klipper(Ender 3 v1, BTT SKR Mini E3 v2) [stepper_x] position_max: 220 [stepper_z] endstop_pin: probe:z_virtual_endstop [bltouch] sensor_pin: PC14 control_pin: PA1 x_offset: -54 y_offset: -4 z_offset: 1.930 speed: 5.0…
I needed a fan duct to use with my BLTouch unit and Volcano-style hotend unit. There wasn't one, so I found the closest one I could and added compatibility for a BLTouch mount (I think). I'll modify this later if it doesn't end up working…
Modified BLTouch mounting bracket for shorter hardware on the Sliceworx FDD1 system
(Description in german below // Deutschsprachige Beschreibung folgt unten) I wanted my BLTouch probe as close as possible to the nozzle without getting in the way of the fan - neither the inlet nor the outlet. I came up with this…
Other Hemera ducts are for large blower fans, often at an angle, which is fine for bed-slinger printers, but severely reduced my Y-axis on my Ender 5. The bottom surround is definitely someone else's design, but I tried so many so long…
Quickly made model for direct drive plate, with four rollers. Most mounts will not fit, one roller bolt will get in the way.
Get rid of the original creality part cooling fan and install a standard 40 mm fan instead. If you want to end up on the quiet side, use a Noctua ;-). If you like this design, please post your print with a picture. Anybody willing to…
It might seem that it will break easily, and it will… until it is mounted and secured. After installation it becomes impressively resilient. In order to keep the lightweight concept of the part, I used nylon screws to secure it to my…
Printing parameters suggestions: 4 walls, 5 layers top & bottom, 60% infill. Support NOT REQUIRED . BLTouch offsets: X=0, Y=35 (Based on 3D Model) If your BLTouch is slightly bended like mine, please figure out the offsets and reconfigure…
Wanted to add BLtouch bed probing to my MK3, that way I can probe glass or other non metallic materials. This is a revamp of the original Prusa MK3 part: extruder body Probe offset: +25mm (X)
I made this thing because it turns out Smoothieware doesn't have support to offset the x/y position of a probe, in relation to your hotend. That limitation requires you to swap out your extruder for your probe whenever you want to…
A small improvement to pascalmakes to use the pan holder also when you have a BlTouch installed. If you like to, check out my other designs too!
I will write the probe offsets and upload a picture when i get home.
For mounting a BLTouch classic to a D-bot with minimal new parts. Currently untested by me, should work fine. http://a360.co/2tadLPW
A very specific title for a very specific part. Technically this is not the entire end effector, just the groovemount portion, so it's compatible with any basic end effector that supports groovememounting (mine is aluminum). Designed to…
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
This is a remix of JohnTran_309510's Ender S1 Sprite Extruder CR-Touch Mount, for use with sensors other than the Creality CRTouch probe. There are two versions of the mount itself. The file named “BL2CRTouch_Mount.stl” has a provision…
I'm working on an upgrade for my Anet AM8 printer. Owning a Prusa MK3S printing I loved the extruder. I wanted the same thing on my AM8. The only thing was that my AM8 printer works with a BL-touch sensor and not with a PINDA sensor. So…
This is a custom cooling solution for an NF-Crazy Plus hotend on an Ender 5 Pro. The NF-Crazy Plus is a Mosquito clone that is wider than the original Mosquito, but also mounts using the stock Creality mounting solution rather than the…
This is a remix of the original Bondtech DDX v3 for Creality BL-Touch mount to also mount an ADXL345 Acceleromenter for klipper input shaping tuning. I printed this with tree support touching build plate only. Print Settings Printer…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
Inspired by this one : https://www.thingiverse.com/thing:2514775 BLTouch Back Bracket Designed to feet to my taralu X-carriage or Modular X-carriage on mgn12h rail (wheels holes are free) Print Settings Printer: tarantula Rafts: No…
This is a Klemco style sliding BLtouch mount I created as part of my LGX Groove mount adapter. The model was created from scratch in Fusion 360. This allows the extended range of raising and lowering of the BLtouch on your application. It…
just do 100% infill only adds like 20 minutes and will be way stronger. this should be able to be used on either side. this should help for setting up the BL Touch:…
This is my first post on Prusa Printers. Print Settings: infill 45%, no supports, draft mode Just a simple spacer as I needed one hope it helps you any feed back let me know at: [email protected] want to support me:
Hi everyone. I was looking for ways to mount a BTT Eddy probe USB vesion, in place of a BLTouch and came up with this mount. I had to remove the sensor housing and mount the board on a new printed base. The mount allows you to adjust the…
Update, I have made a new version with an integrated holder for a bltouch inspired by Humanity_co, if you have already printed out the previous version then you will only need to print out the fan shroud clamp and a small adjustable mount…
I really liked mattshub's original prusa MK2.4 extruder, but i have a bl touch, not a pinda probe. Remixed his design to hold a BL touch. correct height can be adjusted using washers ;) BLtouch offset X:32 Y:12 NOTE: all other files not…
Dear makers, here is my approach to a mounting plate for the BLTouch on the Zesty Kryo hotend. I love the Kryo and the very small design. Now it is also possible to use this hotend with a BLTouch leveling sensor. What you'll need for…
--- Update: I added the files for the use of the Orbiter V2.0! The hotend position and thus the Sled and mount for the hotend cooling fan have changed. Have fun! --- This is my current Setup based on the CuLPA V1 (with Orbiter V1.5,…
This is a remix of 3 other models that put together the RP2040 + ADLX345 on my TT Bluer - Voron 0.1 hotend with BLTouch
I create Bl touch mount for yamboo hotend. For the required length, I used a Bl-Touch spacer, which I adjusted to 25mm in a slicer. The distance is individual Spacer: https://www.thingiverse.com/thing:3578888 I used to:…
After I changed nozzles to a slightly longer nozzle, the nozzle would crash into the bed when homing/probing. I designed this spacer to offset the probe slightly to compensate for the extra nozzle length. The spacer is 2mm thick which…
Remix of https://www.thingiverse.com/thing:4592391 Now supports BLTouch sensor Category: 3D Printing
Frank 2.0 on linear rails did not have an available BLTouch mount. This solves that problem.
Spider 3 Pro mount + BLTouch mount for EVA3 using high flow ducts. (Works for E34M1 i believe) Hopefully this helps someone.
A BLTouch adapter plate designed specifically for MakerGear M2 Rev G and ANTCLABS BLTouch V3.1 (#ad). This design is part of my SKR 2 mod for MakerGear M2 Rev G. The M2 has been the absolute workhorse for me and I love it very much ever…
Remix of BLTouch Mount for Bondtech Prusa Extruder
A mounting bracket for the flash forge creator pro. Mounting will require 2x 50mm M3 machine screws, as well as 2x 10mm M3 machine screws.
SP-5 V3 BLTouch / 3D Touch 3 perimeters, 0% infill
This is a pretty sturdy mount for your BLThouch and require no modification on the printer, for mounting it you'll need 3 M3 screws with a lenght between 8 and 11 mm. For mounting the blthouch I used the 2 M2,5x16 bolt that came whith the…
These parts will allow you to convert your Kobra Max from Bowden to direct drive using a Micro Swiss extruder, a Revo 6 hotend, BLTouch and 5015 part cooling fan(s).
Built for a modified Creality Ender 5 Plus with Biqu H2 V2S Extruder to integrate with a BTT SFS2.0 smart filament sensor. Printed in ABS-CF for stiffness/temp resistance (running in a heated chamber). Some holes may need to be tapped M3…
Mount for: BFPTouch - Poor's man BLtouch. A simple, cheap, neat, precise, compact and reliable any surface Z Proble for bed leveling. by brunofporto https://www.thingiverse.com/thing:2890290 which I really recommend. It's cheap and 8-10 x…
Do you have a favorite BL Touch mount, but it doesn't work because it was designed for a standard tip, but you have a volcano tip? This extension will space the BL Touch down by 9 mm and is the same profile as the BL Touch, so it should…
BLTouch mount with some additional space for a wider belt clamp x offset around -26mm, y offset around -22mm z offset around 2.9mm (You must measure yourself)
Bearmera bltouch mount Remix of pekcitron Bear Hemera(aka Bearmera) extruder mount for using bltouch. You will need to print the front body part to replace the original one. The thread insert version require 2x M3x4.2x5 heat set thread…
A small box to lock the 5 pin dupont cable of bltouch. Long story short, i bought a fake bltouch and it doesn't have the small jst .125mm connector. The only way to connect it is using the dupont connector. The connector becomes loose…
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
I was asked by a friend to make this so I am uploading it here. If you want me to make a different version, please let me know and I will do my best.
Ender2Pro-BlTouch BLTouch bracket for the Ender2 Pro Installation This should work with the M2.5 nuts/screws provided with the BLTouch or you can use M3 screws (with no nuts). Note: When using M3 screws, you will be tapping directly into…
This is a combined BLTouch and Probe mount that includes a BLTouch protector. It will be referenced in future designs. In case you want to modify the design or create your own fan duct around it, it's available as a STEP and Fusion360…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.20 Infill: 25% Filament brand: Tucab Filament color: Black Filament material: PETG
[UPDATE Feb 15, 2022]: I made an update of this mod which you can find here https://www.prusaprinters.org/prints/134733-updated-satsana-50154020-fanbltouch-for-ender-3-en Thanks! [UPDATE Feb 12, 2021]: Uploaded the .step files for the…
Pretty basic to print. Use supports to get screw head areas, obviously the big flat side down. I printed mine at 50% cubic infill for the best multidimensional bend resistance. This has been tested and works great. Category: 3D Printer…
Ender 3 V2 mounting plate adapter for Archetype (Experimental Branch) . Mounting block & holes sized to fit MGN9 rail mounts. + BLTouch mount for Blackbird Fan ducts (Short, add spacers for other duct lengths). (See this post for Mjolnir…
Longer BLTouch mount for Vulcano heat block for artillery hornet
Why this print head? Fits any 3D printer, that uses ender-3 ot similar hotend Printhead can be removed for service by unscrewing only 2 screws Easy to print - no supports needed Improved air flow for both hotend and model cooling BOM BMG…
Parts Intended for Archetype Experimental Branch bltouch_mount_medium: Uses the 2510 fan screws to also securely mount the fan cover, which the bltouch bolts to. Extra Bom: 2x Heatsets 2x M3x6 BHCS (mounting the bltouch) Probe Offset: X =…
Infill: 15% Material: PLA/ABS Supports: No need Nozzle: 0.4mm Print time: 44m
*** Be aware that there is no way back, takes time and money - consider buying new printer first. But I'm happy now and that what counts *** *** Discord to exchange knowledge and ideas as we keep improving IFast —…
This is a somewhat original a somewhat remix model, created from scratch using OpenSCAD. I used the BOSL2 library, so if you're interested, you can poke around and change it for your own liking. I created the bracket to fit my Ender 2 Pro…
I made this remix, based on Sascha's files. so it fits Voxelab Aquila. https://www.prusaprinters.org/prints/115518-biqu-h2-ender-3-v2-mounting-plate-with-bltouch
Only a remix of the E3d mount you can find in the assembly instructions. I didn't have the Revo Micro on me yet to test the print, but I already printed the parts. I was to hyped for the Revo, so I had to design something for it.…
Adapter to mount a DC42 Differential IR height sensing board instead of a BLTouch. Should fit all extruders with a BLTouch mount, as long as there is enough space for the board. The board is a bit wider than the BLTouch. The photo with…
UPDATE: V3.8 added +3mm on Y. BL offset is X-32 Y0, Adjustable (On Y) X belt holder. new STL-s and STP. Printhead for KP3S with BMG/V6/BLTouch and X belt tension. You need: -LH BMG (Mirrored)! (When you have a RH version you can print the…
Typically, the sensor is attached to the casing, the peculiarity of this project is that the sensor is attached to the inductive sensor, which is installed from the plant. This mount does not interfere with the casing and allows…
This is a MK8 toolhead with BLTouch mount for the excellent Voron Stealthburner. VORON StealthBurner (vorondesign.com) It's designed for 2 additional 20mm M3 BHCS to hold the hotend in with heatset inserts in the rear piece highly…
