Ender 3/5 PLA Temp Tower (BLTouch + Brim)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3/5 PLA Temp Tower with BLTouch and a wide Brim to support the buildplate adhesion.
- Ocena
- 4,8 / 5
- Polubienia
- 22
- Pobrania
- 872
- Wydruki
- 9
- Wyświetlenia
- 2384
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Why I remixed it
I remixed this one because of a comment I read fromDERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower including the G29 Auto Bed Leveling code and a nice large brim I decided to remix it.
Usage
Just drop the GCode onto a SDCard or upload it to your printer and wait, It takes around 1,5 hours to complete. The provided GCode will work fine with your Ender 3/5 (pro) with a BLTouch sensor attached.
You don't have to change any settings since this is only the GCode.