MicroSwiss NG Adjustable BLTouch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gives a few mm of adjustability up/down on the BLTouch mount on the Microswiss NG extruder.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 1361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was having issues with the BLTouch being a little too high or too low with a few of my nozzles. This gives a few mm of up/down adjustability to the mounting position. Had to sacrifice some strength of the part to clear the mount point for the OEM fan shroud, but hopefully not too much. Maybe I will remix both to work together better.
Affix as normal, but be sure to use washers to keep from pinching and breaking the thin edge.
OnShape document for further modding and remixing: https://cad.onshape.com/documents/0531b273bb329a57aabbd1dd/w/583c3be64cdc8cc604caf143/e/24945307d4e327fc1c93092d