Voron Legacy Carriage mount with integrated BLTouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To use BLTouch probe instead of inductive probe. CW2 style extruder mounting.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 309
- Wydruki
- 1
- Wyświetlenia
- 1581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Redesigned X-carriage for the Voron Legacy to use BLTouch probe instead of inductive probe. Also changed to use CW2 style extruder mounting. Both Stealthburner and Afterburner use the same mounting so either works.
Adjusted cutouts in the space between the left and right parts to account for the BLTouch. Two holes added for threaded inserts to fix the probe.
Bracket to hold BLTouch has a small hole to be able to adjust the set screw on top of the BLTouch.
Cable from probe can be routed rear through a hole above the bearing to come out of the back of the carriage, but should also be able to be squeezed between the extruder and hotend fan, depending on your setup.
My offsets are:
x_offset: 0
y_offset: 27
z_offset = 3.630
Original design credit goes to the Voron team