Anycubic i3 mega Hotend fan box (also Mega-S, Mega-X, Full Metal, BLTouch & E3DV6 versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://www.youtube.com/watch?v=FDKF7qeqDSg Features 18.2.2021 updated the fan duct for more spacing around the nozzle.
- Ocena
- 4,667 / 5
- Polubienia
- 120
- Pobrania
- 1235
- Wydruki
- 15
- Wyświetlenia
- 9577
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Features
26.11.2021 updated
- added duct with stopper at fan hole
18.2.2021 updated the fan duct for more spacing around the nozzle.
- BL touch
- standard parts
- flow optimised
separation of hotend and nozzle coolin
I wanted to have an easy accessible Extruder for nozzle change. And an easy changeable Nozzle duct.
And i did not like to buy new parts - so you do not need anything else then you already have on your printer.
If you want go improve the screws you can go for thread inserts. Which i melt into the part with my soldering iron. In the beginning I just did the holes 2.5mm without inserts - works fine as well.
But it works fine as well if you just screw the original screws into the 3D printed parts.
A big advantage is that the flow of the hotend cooling is going straight to the hotend and is not affecting the nozzle cooling. The print results are improved!
The Duct and the hotend cooling are CFD flow optimized.
You can use the original fans and screws - no need to buy new parts.
To make it perfect use M3 inserts otherwise use the stl files with "screws" in the filename.
Print instructions
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 25%
Filament: Extrudr PLA Black
Notes:
I used Extrudr PLA and ASA for the duct. But i was using a PLA duct for a long time as well.
Set support overhang angle to 85 - only the horizontal bolt needs support