Rapido UHF Improved Cooling - Stock Stealthburner Face
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on the Rapido UHF Stealthburner Printhead. Instead of extending it, I changed the cooling angle.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF.
The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air flow channel to flow smoothly to the new outlet.
This means you can use your STOCK Stealthburner face and all the mods and enhancements that people have made for it.
Please see the pictures for a better idea of the differences.
Also, Please note: You'll need to print both the front printhead mount and the rear. I accidentally used the Rapido 2 printhead front when remixing and it's mounting holes are at a different angle than the Rapido V1 rear mount.
As far as I can tell the Rapido V1 and V2 mount in exactly the same way, so I'm not sure why it changed.
As a small bonus, I also made some tweaks to the rear mount to make it a little more structurally sound and I also used that indexing hole that is on the front face that I've never seen utilized in any STL.
Fusion 360 project is included if anyone wants to tweak it.
Let me know what you think or if there are any issues!