Voron Stealthburner CW2 E3D V6 Revo printhead bracket (Aliexpress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod to allow for bolting an Aliexpress E3D revo Six to a Voron Stealthburner CW2
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 317
- Wydruki
- 1
- Wyświetlenia
- 1111
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
BETA
The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. 
These updated brackets allow for a more stable fix using 4x M2.5x8mm socket hex bolts that came with the order. This approach is rock solid in comparison.
One thing that worries me is the SS cable strain relief. As it is attached to the heater there is a chance it could melt the mount plastic.
- undid the metal clamps
- put a 7mm slit in the grey insulation
- protected the inner wires with a small strip of kapton tape
- reattached the metal clamp, don't over crimp
- another small strip of kapton around the outer grey insulation to help stop the split spreading
FINAL
I'll disassemble after a week to see of this works and post an update.