Stealthburner CW2 Body with BSP connector and sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slight modification from the ERCF V2 toolhead with sensors to allow for a BSP adapter instead of ECAS
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
While making the required toolhead modifications for my ERCF V2 build, I realized that the ECAS connector I had installed kept “popping out” from the pressure in the extruder while loading filament. The ECAS was just not sitting tightly enough.
Fortunately I had the BSP connector (PC4-M10) laying around from the Exhaust Panel that I removed from my Trident a while back, so I made a quick modification to allow installing this adapter instead.
Note: When done printing, give the part some time to cool. When installing the BSP adapter, go slow! The wall behind the adapter hole is very thin and can easily break.