Stealthburner CW2 Body with BSP connector and sensors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slight modification from the ERCF V2 toolhead with sensors to allow for a BSP adapter instead of ECAS
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
While making the required toolhead modifications for my ERCF V2 build, I realized that the ECAS connector I had installed kept “popping out” from the pressure in the extruder while loading filament. The ECAS was just not sitting tightly enough.
Fortunately I had the BSP connector (PC4-M10) laying around from the Exhaust Panel that I removed from my Trident a while back, so I made a quick modification to allow installing this adapter instead.
Note: When done printing, give the part some time to cool. When installing the BSP adapter, go slow! The wall behind the adapter hole is very thin and can easily break.