Liczymy pasujące modele…
! This is a work in progress! Parkside Performance Drill Stand The Parkside Performance Drill Stand/Press allows for easy drilling of perfect right angle holes with a Parkside Performance cordless drill. The integrated dust shoe allows…
Side bracket for 40x40mm aluminum profiles for Fanatec Clubsport DD Pro / CLS DD / DD or DD+ Wheel Base's. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time or…
This simple model represents a section of our extruded rail, designed to mount accessories or anything your imagination can conceive. The intent is for you to use the STEP model to create parts that mount to the actual extrusion of your…
Die Platte muss aufgrund der Fertigungstoleranzen der Maste angepasst werden, um auf dem Mast verbleiben zu können. Natürlich kann auch die Skalierung angepasst werden, dann Sitzt der Ring allerdings nicht mehr fest auf dem ersten…
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
NOTE: This mod is (mostly) IRREVERSIBLE . Do not attempt unless you are absolutely sure this is what you want. As a follow-up to my previous spacer clamp mod , this new method requires replacing the internal extension bridge mechanism…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
I make a certain recipe for my kids every week that takes 4 TBSP of flour slowly stirred in , I keep forgetting how many TBSP I have added so I created this spoon that holds all four TBSP. I printed in ASA so I can put it in the…
A very simple scoop for measuring things. Internal volume is probably not exactly 5 & 15 ml due to chamfers, but close enough for my needs I use this one to perfectly measure loose tea for my taste: Large scoop - for regular loose tea,…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
BSPP Swivel Female-Male according to ISO 228-1. Features wrench flats for easy tightening, with each flat marked to indicate thread size (G1/4, G3/8, G1/2, G5/8, G3/4, G7/8, G1, G1 1/8, G1 1/4, G1 1/2, G1 3/4, G2, G2 1/4, G2 1/2, G2 3/4,…
BSPP Male Stop according to ISO 228-1. Features wrench flats for easy tightening, with each flat marked to indicate thread size (G1/4, G3/8, G1/2, G5/8, G3/4, G7/8, G1, G1 1/8, G1 1/4, G1 1/2, G1 3/4, G2, G2 1/4, G2 1/2, G2 3/4, G3, G3…
BSPP Female Stop according to ISO 228-1. Features wrench flats for easy tightening, with each flat marked to indicate thread size (G1/4, G3/8, G1/2, G5/8, G3/4, G7/8, G1, G1 1/8, G1 1/4, G1 1/2, G1 3/4, G2, G2 1/4, G2 1/2, G2 3/4, G3, G3…
Pinball Leaf Switch Holder with BSP G 3/8-19 Thread This is a 3D printable leaf switch holder for pinball buttons , designed to mount a standard pinball leaf switch directly behind a push button. The special feature of this holder is the…
Replacement switch for the Parkside Performance PABSP 20-Li C4 cordless screwdriver. The original switch can become dama
Popis Držák je určený na stěnu, aby se pod něj vlezla nabíječka s baterií. Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: YES Resolution: 0.2 Infill: 20% Filament: PETG Recommendation: more perimeters
What it is Threaded BSP (G / BSPP) adapter: G 3/4" female → G 1/2" female , with hex body for easy tightening. Threads Standard: ISO/BSP pipes (BSPP / G) Modeled thread (not just cosmetic) Print (tested) Material: PETG Nozzle: 0.4 mm…
The Vevor 6L ultrasonic cleaner has a brass ball valve with a 3/8" BSP thread - that's an untapered thread with a 16.6mm major diameter with a 19tpi pitch. While the cleaner comes with a fitting that attaches it to included hose, I have…
This adapter is designed to mount directly onto the pressure relief / non-return valve of a boiler using a 1/2” BSPP thread . Its purpose is to unlock the valve and speed up boiler draining , making disassembly and maintenance much easier…
Couldnt find anything out there that could be printed in the best orientation for strength, as well as angled to prevent the measuring spoons from flying off. full disclosure, I think this needs a bit more work. either a higher angle or a…
I wanted a way so I could route my airbrush hose out of the way , but keep it handy and off the floor. It is threaded in 1/8 bsp (standard air brush) hose threading so will accept most quick connects. I also included the fusion 360 design…
A simple tool to fasten a 1/2" BSP (1/2 duims) connection to a faucet in a (ofeten) difficult to reach location. Printed in PETG with 20% honeycomb infill. It is strong enough to securely thighten the bold to the faucet.
Die Aufhängevorrichtung wurde zerlegbar gebaut um in der Sonnenschirmhülle Platz zu finden und nicht allzu sperrig zu sein. Die Halter für die Haken sind mit Gummiband an der Befestigungsacht befestigt um beim Transport an der Stelle zu…
Needed a double sided 1/2" BSP female adapter for an irrigation project so decided to whip one up. Print settings: Requires no supports 0.16 mm layer height 5 walls 6 mm inside and outside brim Print first 5 layers slower to ensure good…
This reducing fitting allows connecting two pipes with different thread standards: M15x1.5 metric thread on one side and G1/2 BSP (British Standard Pipe Parallel) on the other. Designed for shower systems, thermostatic valves, or any…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
The stopper nut broke on my Fanatec CSW V1 and i decided to design one due Fanatec doesn't supply any part for V1 wheelbase.
Printed with PETG No supports required ¾'' BSP to ½'' BSP threads.
This is a bracket to hold an off the shelf replacement load cell. I used one rated up to 200 Kg. My Fanatec Clubsport Pedals V3 had failed. It started to provide inconsistent readings, and one day it stopped working altogether. There was…
This spacer was designed for Xiaomi Mi 9 SE with slim silicone case & BSP-D3 controller.
Very simple but effective air jet tool to connect to airbrush for cleaning, blowing out objects, like cleaning an RC Buggy after use ect … Very simple model starting with a 1/8 BSP thread to connect to most airbrush compressors, the…
Adapter um ein Messer/Klinge an einer Wolf Teleskopstange zu befestigen. Nützlich um Austernpilze zu ernten. Es können verschiedene Messer daran befestigt werden! Das Opinel ist nur nur eines von vielen! Benötigt werden: Zwei bis drei…
I recently got a Lenovo Tab P11 Pro and I also had a BSP D8 controller that I thought I would try and use with it. Unfortuntely the D8 has a maximum capacity of 252mm and the P11 Pro is 264mm so won't fit. Fortunetely I found the…
Adapter for cleaning your Cornelius keg with a shower hose This adapter is designed to connect a European standard 1/2" BSP shower hose to a 7/16" UNF (1/4" MFL) threaded Cornelius ball lock. Printed in PETG on a Bambu Lab X1C 0.4 mm…
2 Abspannungshalter für den HD-Fiberglasmast von WIMO einmal mir 40mm einmal mit 25mm durchmesser um den 10Meter mast 2x abzuspannen Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** 0,2…
I hope others can benefit from this. This is my first design using OnShape. I think it looks pretty good and it prints well. This version will measure out a to 1 tablespoon plus. Printed using Hatchbox PETG .4mm nozzle .1mm layer height 4…
In the game, one of these was stolen and illegally taken to a bad timeline, where it was sending bad things to our reality. The final puzzle was to make the dangerous journey to deactivate it. I even set up a popup canopy as a time…
Perfect for temporarily sealing hydraulic, pneumatic, or other system components during construction or maintenance, protecting against dust and debris. This design has been thoroughly tested in real-world applications, ensuring excellent…
BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…
Die überstehende Klappe an unserer Wasser Serviceklappe im Heck unseres Chausson V594 Campervans hat mich immer gestört. Kisten blieben daran hängen und standen schräg im Raum. Die Profile können einfach auf das Holz aufesteckt werden.…
For BSP Thread 1 3/4 Inch. There is also a distance holder for floating objects.
This is a storage box for BSP-D8 based on the rugged box by Whity. All you need is a set of 6 M3x30 screws. I also included set of different top lids.
I lost one of the thumbsticks and could not find info online about wich thumbsticks are compatible, so I made this and an Xbox one version. Printed using supports and put thumbgrips on top.
Space-saving tablespoon fits inside your powder can. Normal tablespoon is too long because of the handle and it usually won't fit inside my chai powder or hot chocolate powder can. It's accurately 15ml.
Contains the following Pipe Threads: G 1/8 (height: 15 mm) G 1/4 (height: 15 mm) G 3/8 (height: 15 mm) G 1/2 (height: 20 mm) G 3/4 (height: 20 mm) G 1 (height: 20 mm) G 1 1/4 (height: 30 mm) G 1 1/2 (height: 30 mm) G 2 (height: 30 mm)
WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…
Face buttons for the BSP-D8 controller for phones Variants with XABY and Playstation symbols. The results may vary depending on your printer.
This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.
This simple hook latches on to the tube profiles of the Fanatec Clubspot GT sim racing cockpit cockpit and can hold keyboards, controllers and other accessories.
This phone holder is designed to accommodate a wide variety of current-generation smartphones, including those with thin cases. It mounts securely to the upper accessory rails of the CS GT cockpit.
Front tube plug adapter for Fanatec ClubSport GT Cockpit to mount a Simagic kill switch. Runs the cable inside the tube. My plug locking points were slightly too large to sit perfectly flush, I reduced the diameter by 0.4mm, but I have…
Pipe Fitting 8mm Hose Barb Tail 1/2" BSP Male Connector Joint Coupler Adapt
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option. The cupholder…
I make a certain recipe for my kids every week that takes 4 TBSP of flour slowly stirred in , I keep forgetting how many TBSP I have added so I created this spoon that holds all four TBSP. I printed in ASA so I can put it in the…
Ein Upgrade der ursprünglichen Motorhalterungen, bei dem der Motor höher platziert wird, wodurch der Vibrationseffekt erhöht wird.
Jednoduchá pomůcka pro rychlé určení průměru trubkového závitu u armatur bez šroubování. Je jich tu sice již několik, ale všechny se závity (což je fajn), ale ani u jedné ty závity pořádně nepasovaly. Většinou byly dosti na těsno. Na…
This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…
Die Gewinde sind nicht abdichtend, müssen es aber für diese Funktion auch nicht sein. Legen Sie den Behälter bei aufgeschraubtem Adapter nicht hin. Drucken Sie das Teil ohne Stützstruktur und orientieren Sie es mit der Sägezahn- Gewinde-…
Nach dem Druck ist an jedem Halter eine etwas lockere Strebe. Die Strebe kann man einfach vorsichtig ab sägen. Die beiden Halter richtig herum mit einem Abstand von ca. 26cm an die Wand hängen.
Can be printer at 98% size to ensure fit, and foam sheet used to fill the gap to create a seal
I used two of these to connect 3 coils of ¾" ldpe pipe to the 2" pool pump outlet for swimming pool solar heating. Printed out of ABS, smoothed by acetone brushing. So far they've held up for 6 years.
UPDATE 2025/04/24 I no longer recommend this clamp. Instead, I've remixed a model by another user that has more universal compatibility. Please see here . This spacer enables you to clamp your phone vertically with the BSP-D8, allowing…
Adds a ledge to the original Fanatec ClubSport DD/DD+ Mount so it can be mounted vertically as not every simrig has a 4080 support that is horizontal.
Will work with Elgato flex arms and other such 3rd party mounting solutions. Pick the corresponding file for either Steam Deck + , Stream Deck MK.2 https://www.elgato.com/us/en/p/heavy-clamp https://www.elgato.com/us/en/p/flex-arm-l…
Halter für Abspeergitter wo ein kabelbinder durch das loch geführt werden kann und das absperrgitter fixieren kann.
Quick Basic Mobiel Phone Holder for SimHub which bolts up to the front of the new Clubsport DD wheelbases. 4x Sizes, measure the width of your mobile and print the appropriate model.
A very simple scoop for measuring things. Internal volume is probably not exactly 5 & 15 ml due to chamfers, but close enough for my needs I use this one to perfectly measure loose tea for my taste: Large scoop - for regular loose tea,…
Measuring spoons with a flat top for leveling and a deep cube-like shape for scooping. Precise to international standards for tsp, Tbsp, etc. Labeled with ‘t’ for teaspoon and ‘T’ for tablespoon. Prints well without supports. I made these…
½ inch pipe with BSP thread in both ends. Printed with 0,16mm layer height. I recommend printing theese with atleast 3mm brim. Had a few come loose without a brim. Be sure to check out my other piping models!
½ inch pipe coupler. Printed with 0,16mm layer height. Be sure to check out my other piping models!
A pipeflange to screw to the wall, tabletop or similar. ¾" BSP pipethreaded and fits nicely with my other ¾" models.
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…
Eine Seite hat 100mm Innendurchmesser und die andere Seite 100mm Aussendurchmesser. der Schieber hat 2 kleine Zapfen die in einer Nut laufen und somit verhindern, dass man den Schieber komplett herausziehen kann. Das Teil mit der Nut kann…
I made this to quickly allow me to fit a 1/4" BSP PCL XF coupling to a compressor which only had an M16x1 female socket (fairly unusual). It should be rugged enough for one-off usage, I'd recommend a metal fitting for long-term use, and…
The Thing is a replacement thread insert for the Grohe 47453IPO shower shut-off handle because the original replacement part is very expensive. After the print you need to clean the threads from the support material with some tweezers.…
A model to improve the flow lamination on the output of a garden tap when a hose isn't connected, to allow the flow to be more laminar. https://www.aliexpress.com/item/4001276476719.html I believe the specific ¾" BSP adapter was purchased…
Since I was tired of external power supplies always lying around, here’s a simple solution. I mounted the PSU directly to my aluminum sim rig to keep things tidy. To mount it, you’ll need two M8 hex bolts and, for a 40 I-type aluminum…
For non-Spanish speakers: uncuarto.3mf = ¼" Female. uncuartoM.3mf = ¼" Male. tresoctavos.3mf = 3/8" F. tresoctavosM.3mf = 3/8" M. media.3mf = ½" F. mediaM.3mf =½" M. trescuartos.3mf =¾" F. trescuartosM.3mf = ¾" M. unapulgada.3mf = 1" F.…
This case hex bit holder is remixed from Customizable Hex Bit Holder for: Parkside PABSP 20-Li C2 Parkside PABSP 20-Li C4 Parkside PSBSAP 20-Li B2 Category: Hand Tools
This is a functional and easy-to-print garden shower nozzle designed with a standard G 3/4" BSPP thread, making it compatible with most European garden hose systems like Gardena or Bradas. The model features a spray head with vertical…
For years, I’ve been using a submersible aquarium pump to flush my CPAP hoses by connecting them to the pump and immersing them in a cleaning solution. I leave them there for about 12 minutes. Now, I’ve designed an adapter that makes…
As I didn’t like the valve dangling around I printed a mounting bracket. Used PETG and painted it for UV protection. Printer: Anycubic Mega S Nozzle: 0.4mm Line width: 0.5mm Layers: 0.3mm Infill: 25% cubic no support Installed with 4x65mm…
@woelpi mentioned that BSP G1_8-28 is commonly sold as M10. And that was the case of all my PC4-M10 fittings! The thread was much finer than normal M10. I took the thread from @Jorn's model, and eyeballed it to the @linus's model. It…
Intended to fit a standard UK garden hose connector - 3/4 BSP thread A rubber o'ring - OD 16mm x 2mm diameter (should work) this must be fitted or the part will leak. Category: Household
Replacement hand wheel for shut-off valve. Size of the inner quare is 6mm. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 100% Filament: Spectrum PLA…
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
Diese 3D-gedruckte Klammer wurde speziell für die ovalen Stützrohre des Bestway Steel Pro MAX Pools entworfen. Sie ermöglicht es, die Abdeckplane sicher am Poolrahmen abzuspannen, um zu verhindern, dass sie bei Wind verrutscht oder…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = .75 unit_volume_1…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 1 unit_volume_1 =…
This 3D-printable adapter solves a problem I ran into with my grandparents’ water tank. The tank has a 2" BSP (British Standard Pipe) fitting with four threads, they need to connect it to 3/4" BSP garden hose. This adapter allows them to…
G3/8" Threaded Hydraulic Cap – Print It, Use It, Love It! Ditch the heavy, expensive metal caps and upgrade to this smart, precision-designed G3/8" threaded hydraulic cap. Engineered for a snug, leak-free fit, it locks in place without…
G1/2 Female to G3/8 Male Reducer (BSP) is a practical and lightweight solution for those who need to adapt connections quickly and efficiently. Made from high-quality PETG – a resistant, durable material with excellent mechanical…
