Snap-fit garden hose connector with 1-inch BSP screw fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard snap-fit garden hose connector with 1-inch BSP screw fitting - as often used to connect to garden water pumps.
- Ocena
- 4,8 / 5
- Polubienia
- 75
- Pobrania
- 685
- Wydruki
- 4
- Wyświetlenia
- 2430
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps.
(Note: the hex bolt for tightening was sized to match the outer diameter of the thread, and not a standard snapper size - and so it's ~33.25mm. Tighten manually or with some sort of adjustable wrench.)
Needs a standard ~11mm washer to be added in the top groove - see picture.
(If you need to check the details of the thread, this is an example [there are many] of the standard BSP sizes: https://www.v-flowsolutions.co.uk/british-pipe-threads/ )