Snap-fit garden hose connector with 1-inch BSP screw fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard snap-fit garden hose connector with 1-inch BSP screw fitting - as often used to connect to garden water pumps.
- Rating
- 4.8 / 5
- Likes
- 75
- Downloads
- 679
- Makes
- 4
- Views
- 2,421
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps.
(Note: the hex bolt for tightening was sized to match the outer diameter of the thread, and not a standard snapper size - and so it's ~33.25mm. Tighten manually or with some sort of adjustable wrench.)
Needs a standard ~11mm washer to be added in the top groove - see picture.
(If you need to check the details of the thread, this is an example [there are many] of the standard BSP sizes: https://www.v-flowsolutions.co.uk/british-pipe-threads/ )