Counting matching models…
Mounting 4 x M5 or M6 screws Recommended print settings PCTG or ASA (for strength and UV resistance) Print on it's side (model default orientation) 3 or more walls 0.2mm layer height 7 or more top and bottom layers 10% gyroid infill No…
Print approx. €14.77–€18.06 excl. taxPreliminary estimate for PETGSource material: PET
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…
A full redesign of my earlier 2020 CPAP hose bridge ( 2020 profile CPAP slim bridge by minilogique | Download free STL model | Printables.com ). Print as is, will need relatively well tuned supports, otherwise you just have to do some…
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
This is an adapter for attaching Festool 36mm hose to a “standard” 2 ½" dust collection port. I designed it for using Festool dust collector with D36 hose with my my table saw, router table, planer, jointer, bandsaw, etc. I was using…
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
One of the cheapest options for dust collection in home woodworking shops is to use readily available and cheap PVC drain pipe. The problem is that most dust collection fittings are not made for these pipes (though that seems to be…
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
Tidy up the air hose a bit. Model with an opening on the top.
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…
During a transitional phase, I currently need to refill the water in our heating system quite frequently. However, the hose used for refilling must not permanently connect the domestic water supply to the heating system. To ensure…
I've owned several Look Solutions Viper NT Foggers over the years. I have purchased this little piece of metal hose adapter for all of them in the past. We ended up getting a couple of these foggers at a venue I work at recently and this…
06 aipril 2026: Re-uploaded the model - errors corrected (I was young, green, and foolish)
Adapter to go between the Onefinity Suck It's 2.5" hose inlet to the outlet on the Hercules dust extractor vacuum. Print settings on BBL A1 0.4mm nozzle using BBL PLA Basic 4 walls 3 top and bottom layers 0.28mm layers No support needed
Hose Clip / Clamp Range – 10 mm to 38 mm – Washing Machine, Garden, Aquarium & More A simple, reliable hose clip for a wide range of common household hoses and tubes . Originally designed to secure a washing machine or dishwasher drain…
Adapter for old vacuum hoses from ?Braun? Brand type hoses.
This is a single piece, clip/holder I designed for my dust collection hose. Its a 2.5" clear flex hose. The only hardware you need are the screws to secure it to a flat surface. Cheers [NjB]
Designed for use with my Ryobi Compact Battery Powered Chemical Sprayer. This allows the use of "standard" bottles. The intake tube can simply be extended with 5/16 in. I.D. x 7/16 in. O.D. Clear Vinyl Tubing No supports
This adapter with 1" thread is made for a specific 1000L keg with these big valves to connect it to a garden hose system. Combine this adapter with a rubber seal from your local hardware store or print one yourself from TPU and other…
ENGLISH: The end piece of the hose for the Parkside PWS 20 B2 wet vacuum cleaner. Turn the hose from the broken piece. It is glued, just cut it off in case of need. From the original we need the mounting ring and the rubber seal. Do not…
Werkzeug, um den Bremsschlauch einer Hydraulikbremse zu halten, um den Pin einzuschlagen. --- Tool to hold the hose of a hydraulic break to insert the end pin.
The original model didn't have a perfectly flat bottom surface, which made it sit oddly on the bed and also have weird slicing artifacts. This simply flattens the bottom and orients the part correctly but otherwise remains the same. Uses…
Wort aerator and spilling hose holder in one. Idea borrowed from: https://www.thingiverse.com/thing:3386866 Added 9mm OD hose holder and clamp to plastic 30l fermenter (OD 37cm). v.2: Added house OD 12 and 15mm, choose in FreeCAD what…
This is a simple funnel that can thread onto your garden hose if you want to fill it manually with some cleaning solution or something update: added an extra extra-large version so you can use the cut function in your slicer to cut it…
Washing machine drain hose adapter to DIN 32, DIN 40, DIN 50, DIN 75 or DIN 110 standard sewage pipe. This rigid adapter allows you to connect a standard washing machine drain hose to a DIN32/40/50/75/110-compliant drain pipe, which are…
I printed it using ASA filament. Mounting from corners using four small screws (or glue, if you wish).
From my quick research, it seems hoover used 3 or more designs over the years for hose connectors for SteamVac carpet washers. My hose tore next to the connector, which seems to be a common problem. Replacement hoses are no longer…
A simple lock to prevent someone to accidental disconnect your hose. A use-case could be if you have multiple connectors in-line or side-by-side and you want some of them to not be disconnected. Print with PETG, ABS or ASA. Could work…
This combination of garden hose connector from @matej and bottle cap from @3DAcademy can serve many purposes for example: pressure reductor - with a large hole in the bottle you can water your plants without any pressure from the hose and…
This is a practical and durable garden hose mount designed to keep your outdoor space neat and organized. Its compact design allows easy wall mounting with 2 screws (i used 3,5 x 30 mm) and provides reliable support for garden hoses. The…
Connect a 1-1/4" inlet hose to a standard 3/4" garden hose. Layer height: 0.11mm Wall Loops: 4 Top shell layers: 3 Bottom shell layers: 3 Infill density: 100% (rectilinear) Supports: YES (10° threshold angle)
Remix of Wolf_Prints remix of the model from Uncle Jessy's HEPA filter vent for the Elegoo Centauri Carbon. I'm intending to use this with an original design adapter to a flexible dust collector hose. Wall thickness of the cylindrical…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
Possibilité de faire des modèles, voire, des impressions sur commande. N'hésitez pas à me demander.
A plug on the condensate outlet tube from the air conditioner. It is made for a tube with an outer diameter of 16 mm.
Update: April 20, 2026 I added more sizes per requests. Update: February 26, 2026 Per a request, I added the 80mm version and 165mm files to this. If anyone needs any other sizes, please let me know. Thanks! I like the original design…
I just split the model to work on my Anycubic Kobra S1. should be fine for printers of similar size. It needs supports for the dove tail and the back side of the quick connector. No gluing needed, the quick connect will lock the two halfs…
il y a deux model un 40° d'inclinaison et un de 90° de diamètre 19.8 mm pour recevoir un tuyau d'évacuation de climatisation ou autre n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir ! Bon print !
I don't like the various water hose attachments as they drastically reduce the cross-sectional area of the hose and cut the water flow. so I made a friction-fit nozzle that slips over the hose from the outside In hopes that this design…
We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…
Designed like my Core One version, this is a more rugged vent to mount on the back of your Centauri carbon. Unlike the Core Ones nice bolt pattern on the back, the Centauri Carbon has a wonky 3 bolt design for mounting, which poses a…
6mm Dosierschläuche beim Aquarium gedruckt aus PETG. Die Verlängerung damit die Schläuche nicht an der Scheibe liegen.
Replacement part for the Intex PureAqua SPA pump. Printed with 100% infill and PolyMax PLA.
Wall tube insert for a portable AC hose, this is designed for the exhaust and intake for air through a wall or door. A friend needed an exhaust port for his wall in a garage for his portable AC. 5.5inch base and hole Printed in PETG No…
I used a piece of EPDM P-shaped sealing strip between the printed adapter and the fume extractor. Mounting screw 4,2x32 mm, Clas Ohlson 40-9564-14
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - v1.0 is used for coupling 100/125/150mm - v1.3 is used for coupling…
After creating a similar exhaust adapter for my Core One, I decided to design one for our office's Qidi Q2. This adapter takes the Qidi Q2 exhaust to a 120mm PC case fan, with another adapter to 4" exhaust hose that will be run to a roof…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - it comes with a aditional/optional seal for ataching to rough surfaces…
its v1 with a gun arm and wings separated for people without ams
This 3D-printable plastic clip is designed to neatly guide and secure a hose on the Mystice Kitepump or any other pump with a 100 mm diameter. -> see my other Version for pumps with less height It can be printed on standard size 3D…
Cap for a male 1/4-inch air hose quick connector to keep dirt out of it when not in use. I put a quick connect vale on my drip sprinkler system to flush it out in the winter and use this cap to keep dirt out of the valve. The cap has…
This adapter allows connecting a 35 mm hose from a shop-vac to Parkside chop saw's dust port. I use a Mirka shop-vac and the fit for the hose is quite snug. The fit on the saw requires tapping the part in with a mallet (because of the…
(english below) Es handelt sich um Entwicklungsmodell für einen Ersatzschlauch für Audi 048103223A. Der eckige Prototyp lässt sich gut drucken. Es gibt auch eine abgerundete Version, welche ich allerdings noch nicht gedruckt habe, da ich…
Der Adapter passt auf einen ausklappbaren Abfluss einer Regenrinne D 100 mm. Am anderen Ende kann man einen herkömmlichen Poolschlauch D 38 mm aufstecken. So kann man das Wasser über den Poolschlauch zu einer beliebigen Stelle leiten. Die…
This is a sturdy 3D-printed clamp designed to securely hold a 25 mm (1") polyethylene water hose against a wall, wooden board, or any flat surface . I created it to keep PE water hoses neatly in place while remaining easy to install and…
Keep smoke and odors moving out the window so your lenses stay cleaner and your engraves stay crisp. This compact, high-flow extractor is designed for flat or low-profile projects and mounts to most standard laser beds. What you get 3MF…
I needed a way to quickly close off my outside vent for the winter, so I added a cap & handle to the male connector. Gluing a piece of foam to the inside helps with the insulation. The Fusion 360 file is included, in case you want to…
A simple screw mounted hanger for the Eley brass garden hose nozzle. #8 screws to mount. Print oriented as pictured with supports under arches.
A functional 1/8 NPT x 3/8 Hose Barb 90 Degree Elbow. It is designed in two separate pieces so that it can be printed in a more optimal position. I made this out of necessity for a condensation drain line on my Lennox furnace, after my…
ully 3D Prınted Hose or Shower Holder. It's adjustable and strong design. I hope you guys like it...
this model should be printed on its side so that the box opening in on the left or right you must still use springs, but in a pinch you can use discarded pen springs instead of the original ones to use: disconnect the hose from the…
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port. This can be printed with no supports on a Prusa MK3S.
I created this for my Peugeot 306 because I wanted an easy way to flush the radiator and not have gravity do the work slowly. Check to see if your car uses the same thread pitch. With this, the (relatively low) pressure of a garden hose…
See the pictures for one application. This adapter is designed to connect a 2-1/2 inch (63mm) hose fitting to a 4 inch (100mm) duct connection. The inner dimension is slightly tapered but is 2-1/2 inches (about 63mm) at its widest point.…
Simple dual connector to mount underneath a shelf. Features male and female connectors so that the residual dust in the hose doesn't come out. If you coil the hoses a bit, you can store many in a small place. Two versions: one with a 4mm…
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
4+1 nozzles Compatible with the segmented or ball joint dust extraction hose ( here ) Funnel nozzle Shovel nozzle Beak nozzle Flare nozzle Additional free Ring Nozzle Best printed with PLA or PETG at 0.3 mm layer height. No supports…
I've made this coupler for my Felder Hammer A3-31 jointer/planer dust collection. Main purpose was to create something mine because i like to desingn things :-) It was designed with glue-in insert, so it prints with just small support on…
connector between Playmobil firefighter hoses. Easy to print, with support rods Print, enjoy !
Attachment for the coffee grounds container, not the coffee grounds container itself. Part Number: 12011727 Used by: Bosch CTES33W, Siemens CT636LES1, Neff N 90
Remixed a model from Grant@GranitWorks to make it work with my Mastercraft belt sander. Print with the flange contacting the bed. Use supports (contacting bed only) and a large brim to prevent tip over. I printed with PLA at 0.2mm layer…
Created to fit a Bissell Clean View (Model No. 3533). This piece is inserted into the handle of the vacuum when the hose is in use. I had the issue of dust and debris coming out the handle opening when vacuuming with the hose. My temp fix…
A simple adapter for quick installation of the original Karcher WD3 vacuum cleaner hose. The connection of the elements is loose enough that insulating tape could be used to seal it. Printer settings: 0,2mm layer height 4 shells use tree…
Henry Hoover hose clip. This allows the hose to be clipped onto the hoover to keep the unit tidy. Snug fit but not too snug where it will cause wear issues. If you position the clip where I have in the image the hose wont slip in the clip…
After looking high and low I made this simple connector to splice my shop vac hose back together after I had to cut out a small section that had a hole in it. This may work on other brands as well but I only have the one shop vac. I have…
This is a shroud to adapt a 92mm enclosure fan to a standard 2.5" air handling tube for outdoor ventilation.
SInce VW doesn't sell them anymore, we have to get quite creative to keep our busses alive. So here's an attempt to get the rubber buffer for the Y-Pipe, which is starting to fall off or missing over time. Print in TPU. Installation maybe…
2 Versions of this lid. The version with the fins only has them for the purpose of making the hose coupler stronger so it doesn't break as easy when using a hose clamp on it while keeping air resistance to a minimum. Best way to print is…
New vacuum hose deflector for Makita guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…
New vacuum hose deflector for Festool guide rails. The lateral flanges prevent the hose from getting entangled. Additionally there's a version without flanges, simply to protect the aluminum rail. Easy to print. No tools required. Fits on…
Can be plugged between hose adn accessories Is designed to rotate 360° Held together by 1.75mm fillament According to Einhell 36mm Hose. Hose fittings measure 35-35.5mm (conical friction fit) Print instructions: 0.2mm leigher height Maybe…
This model is compatible with the lego system.
This allows a 1-7/8" Rigid wet vac vacuum hose to attach to the 35mm hose inlet on the SB3608DAQ4 36V Metabo HPT 3x21" belt sander. Or any 35mm hose inlet, I only tested on the belt sander. Printed in ABS but any material should work.
This adapter is designed to mount directly onto the pressure relief / non-return valve of a boiler using a 1/2” BSPP thread . Its purpose is to unlock the valve and speed up boiler draining , making disassembly and maintenance much easier…
I made this simple exhaust hose adapter for the Sovol SV08 with the OEM enclosure, that comes with a 9025 fan. I wanted an adapter for 75 mm (3 in) hoses to save space. I couldn't find one, so I ended up making one. It uses 6x3 mm magnets…
Dust Deputy 5in Hose Adapter Made to fit the super dust deputy for use with 5" hose as it only comes with a 4" adapter from the integral 6"
55 Gallon Drum Air Hose Adapter to add bleed air for dust collection bag pressure equalization.
Dust Deputy Bleed air 5in Hose Adapter for bag pressure equalization hose.
User recreation of the Sienci sleeves that goes over the metal spindle clamp. Two are included. Keeps the spindle from being scratched. Designed for 80mm spindle. I increased the space inside the sleeve from Sienci's in order to allow the…
18mm hose support to stop kinking for maximum flow. PETG, printed in edge to minimise supports. Shock cord to reduce vibration transfer, zip ties to secure. Freecad drawing .
Short connecting link for Festool vacuum hoses (ID 35mm).
