0.5 Inch Hose to Mastercool 3cfm Pump Exhaust Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter replaces the stock exhaust cap that doesn't have anywhere to connect an external vent hose.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working well. So I designed this to vent outside.
Note that this does not have the one way flap that the existing valve does.
- ½" hose pushes on
- screws down and seats on original gasket
- thumb grips to help with tightening
I printed this at an angle to make sure there were no weak planes across the threads. It isn't the prettiest printing that way, but it has been strong for me.
- Prusa Mk3+
- PETG
- 15% infill
- supports everywhere
- Organic
- Stock settings
- 0.3mm draft (2h4m)
Enjoy!