1 / 3
0.5 Inch Hose to Mastercool 3cfm Pump Exhaust Adapter — zdjęcie 1
1 / 3

0.5 Inch Hose to Mastercool 3cfm Pump Exhaust Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter replaces the stock exhaust cap that doesn't have anywhere to connect an external vent hose.

Ocena
0 / 5
Polubienia
7
Pobrania
24
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

The Mastercool pumps have an exhaust vent that doesn't allow any attachments.  When I was drawing a vacuum on large chambers the pump was filling my garage with mist.  I tried sponge filters, duct taping filters on, and nothing was working well.  So I designed this to vent outside.

Note that this does not have the one way flap that the existing valve does.

  • ½" hose pushes on
  • screws down and seats on original gasket
  • thumb grips to help with tightening

I printed this at an angle to make sure there were no weak planes across the threads.  It isn't the prettiest printing that way, but it has been strong for me.

  • Prusa Mk3+
  • PETG
  • 15% infill
  • supports everywhere
    • Organic
    • Stock settings
  • 0.3mm draft (2h4m)

Enjoy!

Tagi