Strong garden hose holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€14.77 – €18.06 net (excluding VAT)
For file: garden hose holder_0.4n_0.2mm_PCTG_COREONE_15h34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €16.41 excluding VAT (range midpoint).
- Weight reported by the author
- 239 g
- Print time reported by the author
- 15.57 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Arches 65 degrees, holes and cutouts for filament usage optimized reinforcement.
- Rating
- 4.962 / 5
- Likes
- 1,601
- Downloads
- 5,168
- Makes
- 28
- Views
- 27,675
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Mounting
4 x M5 or M6 screws
Recommended print settings
PCTG or ASA (for strength and UV resistance)
Print on it's side (model default orientation)
3 or more walls
0.2mm layer height
7 or more top and bottom layers
10% gyroid infill
No brim or support
.
.