1 / 1
Parkside PKS 1500 to 35 mm hose adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter allows connecting a 35 mm hose from a shop-vac to Parkside chop saw's dust port.
I use a Mirka shop-vac and the fit for the hose is quite snug.
The fit on the saw requires tapping the part in with a mallet (because of the ribs on the port).
It will not fall off on its own, but there is a small gap on the base - if you are concerned, you may seal it with a tape or similar. I did not bother.
Print with PLA with default settings.
The model is confirmed to be compatible with PKS 1500 A2.
Warning: The size is wrong for C4. I have no information about other variants yet.