Mouse Platform for Fanatec Clubsport GT Cockpit-Larger With Rim, Mouse Pad, and Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed model that is larger, fits a Logitech studio mousepad, has mounting geometry for a cupholder, and other changes.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option.
The cupholder geometry uses 8-32 threaded bolts with the threads printed. I also included other threaded holes for modularity and ease of designing other attachments. If you want your design to sit flush with the top lip of the platform, the top hole center needs to be 7.5mm down from the top of the model. There are additional holes at 0.50" and 1" with respect to the top hole, and the cupholder uses 2" on center.
Print with the cupholder geometry on the plate, external brim, and no supports. The overhang lip on the top will print without supports.
Requires:
- A Logitech studio mousepad
- ½" cabinet bumpers at Home Depot or similar
- 8-32 countersink head bolts 0.50" long for cupholder addon