Liczymy pasujące modele…
This is a customizable variant of my Magnetic Phone Mount for the Fanatec DD1/DD2 sim racing wheel bases for wireless chargers such as Apple MagSafe adapters or any other round Qi wireless charger that is designed similarly. What you…
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPad Mini 4 with sleeve. Added the logo for fun :)
Designed in February 2025 to adapt GoPro-style phone mount to Fanatec Clubsport Wheelbase V2.5 for use as a dash and lap timer. Designed to be printed with no supports, prototype was made with 100% infill out of PETG. Overhangs in bolt…
This is a simple, easy-to-mount PSU holder designed for the CSL Elite wheelbase power supply. It fits PSUs with a length of around 190 mm and a height of around 42 mm . The design allows you to simply slide the PSU into place — no screws…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
I used two M4/M5 Screws and self-locking nuts to attach the swing bar, as well as two M4/M5 Screws and bolts to secure the pedal. The AliExpress spring bolt is an M6 top and bottom. Depending on which file folder you want to use, two…
Streamdeckplus holder at shifter for Fanatec GT Cockpit
I made this for mounting my knockoff CSL boost kit PSU under my desk. PSU brick is measured to be approximately 170x85.5x40mm, with a 1mm designed clearance in each dimension between the brick and the mount. Piece is symmetrical with…
I bought a fanatec universal hub V2 and was not happy with the shifter panels. Their arrangement regarding to the wheel (I have quite a large one with some distance to the hub) felt off. So I made new shifter panels and included counter…
Works with Fanatec CSL Pedals (should work for regular brake, LC brake, and accelerator) and the following 4Ohm 25W Vibration Speaker . Each mount requires (2) M4x0.7x20mm screws and (1) M5x0.8x25mm hex bolt (with an 8mm head width and…
This can be used for remotes, gloves, pens anything. It has two bolt holes on the bottom to mount to the left side.
For attachment, I used some nonpermanent "Gorilla Contact Adhesive" so that any residue can be removed easily without marking the pedals and allowing for a small amount of flex within the join. As most of the weight is also supported with…
This model is designed to provide a simple but effective forward and backward adjustment system for your steering wheel setup. Perfect for DIY sim racing rigs, this mount allows you to quickly adjust the wheel position without rebuilding…
This design will let you put on any racing wheel with 60mm hole diameter to a Fanatec wheel base with the QR1 system 5x 7mm steel balls are needed printed the final version in PC Blend but PETG also worked fine print settings 0.4 nozzle…
Uses two M8 x 20mm. Print at 20-25%. Designed based on the Fanatec QR2 non-pro mount. Compatible with Pro and regular version, but not lite version. Inspired by this model (for QR1): https://www.thingiverse.com/thing:4803197 OnShape…
This is my take on modeling a QR2 wheelbase side adapter to fit the new generation of Fanatec's quick-release system. Print it as shown in the screenshots. A little support “from the build plate only” is needed for the grove of the…
En I did this Hub for racing simulators, it's not perfect but works. can be a little complicated for mount there's no much space for the wires. All the components are listed on PDF file together with archive DXF for the Front Plate.…
The heel stops can be attached using the standard screws. Model has been split in 2 in order to fit on most print beds. It's advice to print these with extra walls especially around the screw holes. - Example print done with the Bambu…
The stopper nut broke on my Fanatec CSW V1 and i decided to design one due Fanatec doesn't supply any part for V1 wheelbase.
This is a bracket to hold an off the shelf replacement load cell. I used one rated up to 200 Kg. My Fanatec Clubsport Pedals V3 had failed. It started to provide inconsistent readings, and one day it stopped working altogether. There was…
Prints without supports. I used PolyTerra White PLA and 0.2 mm layer height. See images for Strength settings.
Little resize for fit my Next Level Racing F-GT playseat
Holder for the Fanatec CSW Power Supply for a alu rig. Holes are for M8 Screws
everything was printed in 1 color so not very clear to see they work great! micro switch i used was: Micro switch KW10-Z6P075
This is a more rigid knob for the Fanatec steering wheels as the original ones tend to brake quite easily (see Pictures :-)). ++++Print details++++ designed for 0.15mm Layerheight supports needed #####GERMAN##### Dies ist ein stabilerer…
This is a customizable variant of my Magnetic Phone Mount for the Fanatec DD1/DD2 sim racing wheel bases for wireless chargers such as Apple MagSafe adapters or any other round Qi wireless charger that is designed similarly. What you…
To mount the Fanatec 1.5 Shifter and one cheap Handbrake from Aliexpress to a Simrig based on alu profiles.
Simple mounting plate for the Fanatic Shifter 1.5 to mount it on aluminum profiles (80mmx40mm). But it should also work on the Shifter 1.0
I’ve designed this custom steering wheel stand specifically for Fanatec wheels with the QR1 quick release system, to help display and organize wheels in a neat and accessible way. While I don’t own Fanatec wheels myself, I created this…
I’ve designed this custom stand for Fanatec wheels with the QR2 quick release system, perfect for organizing and displaying wheels in a stylish way. While I don’t own Fanatec wheels myself, this stand was created to match QR2…
This is an adapter to mount a Fanatec CSL DD in the top head tube of the Simul8r racing cockpit. Parts needed: 8 x M6x8mm t-slot nuts. Wheel base includes 4 but you will need to purchase 4 more 8 x M6x20mm cap screws 2-4 M6 bolts with…
Replacement Handle / Grip for Fanatec Clubsport Handbrake V1.5
Mount for Fanatec DD PSU to tidy up a sim rig. Slide from an extremity of the alu profile; no fasterner needed. Easy removal of the PSU as it is not hold tight - only suitable for horizontal mount of the PSU. Easy print in PLA with 15%…
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPad Mini 4 with sleeve. Added the logo for fun :)
Replacement part for Fanatec formula wheels lower back cover
As in the original from Ghost Cell, 15x3mm Neodym Magnets can be used. For mounting on the Wheel, the Original Screws of the QR2 Connector can be used. Additionally, I added a second design, for backloaded, stacked magnets. The cavity…
There is a detent ring to lock this with the ring, but its not needed as it fits snug. Printed in PLA with 3 walls and 15% infill
I DID THIS JUST FOR MYSELF AND FOR A FRIEND, ACTUALLY I DIDN'T REALLY WANT TO SHARE IT, SO I APOLOGIZE FOR ANY FLAWS. In order for the face to be transparent, but at the same time darkened, it must be printed from transparent plastic with…
I decided I didn't like the feel of the original paddle shifters on the WRC wheel so I duplicated the outline of the original, but thicker with more rounded edges. Fit is the same as the originals, but needs slightly longer screws.
I created a heel support to replace the original cover in order to prevent my feet from sliding while using the pedals. There are two different versions : one without mounting holes and the other with two 9mm holes for bolting it down. I…
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
Remixed the P8P mount because there was no room for the camera bump. Also changed the mount holes to slits, so the holder cam be mounted more variable.
I simply combined those both parts quick & dirty, so I can use my Elgato Streamdeck XL instead of a normal Streamdeck. https://www.printables.com/model/457629-fanatec-streamdeck-mount…
Support pour pedalier CSL 2 pedales pour playseat challenge. Montage testé et approuvé, conception par mes soins, si besoin d'une modification n'hésitez pas. Pour le montage vous aurez besoin de M4x30mm 8x, ecrous M4 8x, vis M8 x35mm 2x,…
Un petit remix du modèle original pour un peu plus de rigidité
When printing the base increase the wall count until there are no holes/infill between the bearing hole and edge. I used 35% gyroid infill. When printing the arms use the orientation like in the 4th image and set wall count very high…
This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.
This simple hook latches on to the tube profiles of the Fanatec Clubspot GT sim racing cockpit cockpit and can hold keyboards, controllers and other accessories.
This phone holder is designed to accommodate a wide variety of current-generation smartphones, including those with thin cases. It mounts securely to the upper accessory rails of the CS GT cockpit.
Front tube plug adapter for Fanatec ClubSport GT Cockpit to mount a Simagic kill switch. Runs the cable inside the tube. My plug locking points were slightly too large to sit perfectly flush, I reduced the diameter by 0.4mm, but I have…
Material: PLA-Pro Printing settings: Perimeters: 5 Infill: 25% Layer height: 0.2mm Supports: yes
This simple model represents a section of our extruded rail, designed to mount accessories or anything your imagination can conceive. The intent is for you to use the STEP model to create parts that mount to the actual extrusion of your…
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option. The cupholder…
Fanatec kill switch/emergency stop look alike, dimensions are about the same but as i do not have one, they are going to be slightly off. Made for my FFBeast wheel, wired into the DC side of the power supply with a relay The pictured one…
Fanatec kill switch/emergency stop look alike, dimensions are about the same but as i do not have one, they are going to be slightly off. Made for my FFBeast wheel, wired into the DC side of the power supply with a relay The pictured one…
Recommended to print on its side for maximum strength and ridgidity, will need supports for the angled support if printed this way. Could most likely be used to mount the handbrake to other extrusion. Used 4 ¼ 20 bolts, washers, and nuts…
Holds the usb connector and Fanatec Boostkit PSU of the Fanatec CSL DD one M4x16 or similar and one 4mm long insert needed. The screw pushes against the beam with the screw to hold it tight. The tolerances on the PSU and usb holder are a…
Ein Upgrade der ursprünglichen Motorhalterungen, bei dem der Motor höher platziert wird, wodurch der Vibrationseffekt erhöht wird.
This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…
Layer height 0,20 Infill 10% Perimeters 2 Standard noozle 0,4mm Material PLA Supports No
Alternative shifter paddle plates for the large FANATEC NASCAR steering wheel with the ClubSport Universal HUB V2. The shifter paddles are therefore further out and closer to the steering wheel. Four M3 nuts are required for installation.…
Print two(2) of these, one(1) on each end......the slot peg is placed so the end will be flush with 40Series profile...
Fanatec QR1,suport for original connector. U will need 4 m3 heat inserts. Regular m5 screw with hexnut can be used for tightening ring,but nut from bicycle clamp is better and faster option.
installation to install, you must remove the original brake pedal, and then insert 2 M2.5 20mm bolts through the holes of the pedal faceplate and the pedal arm, you must then place the washer and then tighten the nut on the end. Items…
I have provided a ready to print .3mf file. I have printed this in Bambu Matte Red and Sunlu Matte Olive Green successfuly. The improved shaft design was modeled in Blender however the new bolt pattern was done in the slicer.…
Raspberry Pi + Simhub based dash designed for the Elephoont fanatec CS DD FFBeast housing . This may also work with the official fanatec CS DD but I can't guarantee it's functionality. The design includes a safe shutdown button on the…
Designed in February 2025 to adapt GoPro-style phone mount to Fanatec Clubsport Wheelbase V2.5 for use as a dash and lap timer. Designed to be printed with no supports, prototype was made with 100% infill out of PETG. Overhangs in bolt…
Adds a ledge to the original Fanatec ClubSport DD/DD+ Mount so it can be mounted vertically as not every simrig has a 4080 support that is horizontal.
Will work with Elgato flex arms and other such 3rd party mounting solutions. Pick the corresponding file for either Steam Deck + , Stream Deck MK.2 https://www.elgato.com/us/en/p/heavy-clamp https://www.elgato.com/us/en/p/flex-arm-l…
Maybe this helps you to break free from the Fanatec Eco System. For everyone who is afraid to weaken the Maglink: In engineering we are regarding minimal hole distances. Hole distances of 2,4 x dia of the hole is an acceptable minimal…
This is an adapter to mount Mozas Multi-Functional Stalks to a Fanatec DD1 / DD2 Wheelbase. The Clamp is based on the work of thehans ( https://www.thingiverse.com/thing:2940715 ) with an added piece to trigger the turn signal reset.…
Same thing as the original, but added holes to fit the M8 Flat Head Screws that came with my TR rig.
Quick Basic Mobiel Phone Holder for SimHub which bolts up to the front of the new Clubsport DD wheelbases. 4x Sizes, measure the width of your mobile and print the appropriate model.
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
When discovering the Sim Dashboard app I soon needed a mount for my base. The original was a great starting point, but didn't support my phone. So I did what everyone does here. Remix the sh*t out of it. It is my own model, but it is…
Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger This triggers the Auto Cancel feature for the Turn signal stalk, similar to what is shown in this youtube video ( https://youtu.be/6kAldZCjieg?si=Vc8oC_EFhBl4sKFx ) The video…
I made a Button for the Fanatec Clubsport F1 Esports Wheel, but according to the Fanatec Website, the Button Size should be the same with others. You have to remove the original caps, the size is the same as them. They sit very stiff, so…
I bought a used Fanatec CSL Elite wheel base without a clamp so I decided to design my own. Additionaly you need M10x80 bolt and M10 washer. I printed it with PETG with 30% infil with 5 perimeter lines. It is better tp print it on a side…
This is an adapter that adds more resistance to the thumb encoder on the Fanatec Formula V2.5 steering wheel. I found the encoders too easy to turn, so this adapter clips in and prevents unintentional rotation. No additional parts are…
Since I was tired of external power supplies always lying around, here’s a simple solution. I mounted the PSU directly to my aluminum sim rig to keep things tidy. To mount it, you’ll need two M8 hex bolts and, for a 40 I-type aluminum…
A bracket to turn a Fanatec CSL pedal into one with active feedback, here I'm simulating wheel lock and active ABS for my loadcell brake and tyre slip on the accelerator pedal. I'm using the CSL pedals with the tuning plates, mounting…
Holder for Fanatec wheels with QR1/QR2, mountable with M6 screws to your aluminium extrusion rig or with simple countersunk screws to a wall or wood.
A cap to protect the pins of a Fanatec wheel when no QR is installed.
A Spacer if you use the Button Clusters on the Fanatec Podium Hub without the need to use the provided washers.
I used Prusament PETG filament for strength and durability. I also had Prusa Slicer generate some supports for the rounded edges. *this model has a seam that runs throughout the middle of the print
USE NON MODEL FILE FOR PRINT. (otherwise you will need to seperate it by parts) LED holder for Fanatec CSL DD wheelbase. Gap is designed to allow 20 LED long strip to be included. Snap fit design. No supports needed as they are included…
Fanatec shifter knob holder - on 8020 profil rig. Perfect for Sim-lab, Simxpro, TrakRacer rigs
Instead of leaving the wheel emulator dongle inside the QR and to avoid forgetting it inside. This 3D print will place the wheel emulator dongle just at the right place. And no need to fish the dongle after use. The wheel emulator dongle…
The whole shape is beefier and wedged to eliminate the need of additional angle backs, thus making the whole pedal stiffer. I printed mine with PC-CF cause I already had it loaded in my printer but any strong filament should do.
These are 3D model files of the button box & steering wheel hole adapter that can be used with the Ecannon steering wheel and magnetic shifter module which can be bought from Aliexpress at a relatively affordable price. In my case, I used…
Fanatec QR1 Hub to mount spare wheels to extrusion rig OR if you print a little lower to remove the rear tang it can be wall mounted with a single screw. Use paint on supports as shown Printed and tested in PetG.
Bottom cover for the v2.5x(and probably 2.5), uses existing screws. Printed in PETG, 1 wall, 15% gyroid, holes down, with supports, and embossed the SN.
antirotation mount for simube qr2 80/20 mount
Simple mount/holder for the 8nm powerbrick for Fanatec CSL DD to place on the tubes of Playseat Challenge. Use 25mm M3 bolt and nut to fasten to the tube. If you only have larger bolts you can probably drill it out and use those. There is…
This is a simple, easy-to-mount PSU holder designed for the CSL Elite wheelbase power supply. It fits PSUs with a length of around 190 mm and a height of around 42 mm . The design allows you to simply slide the PSU into place — no screws…
