openConnect Lincoiah Fanatec CSL Boost Kit Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
openConnect mount for the Lincoiah branded 3rd party Fanatec CSL DD 180W PSU. PSU Brick measured to be 170x85.5x40mm
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this for mounting my knockoff CSL boost kit PSU under my desk. PSU brick is measured to be approximately 170x85.5x40mm, with a 1mm designed clearance in each dimension between the brick and the mount. Piece is symmetrical with middle cutout accommodating both cables. I don't know how big the official PSU is, but if it is the same or slightly smaller it should fit. I designed in 4 slots, but currently have each side mounted using only 2 snaps.
Should you need to mount a PSU of different size, I recommend checking out this item holder generator over on makerworld. It only supports multiconnect, but should be compatible with openConnect snaps. I think openConnect is a cool project and wanted to contribute a few parts which is why I did not go with the multiconnect generator.