554 modeli
This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
An open-source self-expanding snap for openGrid, available in Standard and Lite versions. It is based on David D's official openGrid snap, with a split spring mechanism that expands when the connector is tightened. This gives the snap a…
Needed a simple snap in zip tie element for holding up a power strip under my Desk using two modules per zip tie and it's almost impossible to remove the strip without cutting the ties Perfect for me
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
The Prusa Core One has a side cavity perfect for customization and accessory storage. The openGrid ecosystem is a great option for this purpose through the combination of native parts and compatibility with MultiConnect, HSW, MultiBoard,…
OpenGrid Underware Zip Tie Snap Element modified for Lite Grid. I haven't actually had time to mount my grid and test it out, but some people on the original model asked for my modified version, so here it is! I printed a few of the…
Description: Transform your OpenGrid panels into versatile display solutions - perfect for craft shows, pop-up shops, and home storage! These precision-designed snap-on corners let you create both 90-degree dual-panel connections and…
An open-source gadget hook generator for openGrid . This model creates hooks that screw into openGrid self-expanding snaps . While other hook generators are available for the openGrid system, this model addresses some specific use cases,…
I wasn't happy with the other command strip mounting options for opengrid, so I designed one that screws into the opengrid frame from behind. This means that there is a stronger mechanical connection between the grid and the mount itself.…
Yet another command strip / Tesa Powerstrip / two-sided tape mount for the openGrid system. I had the following design goals in mind: Easy to print Visually occupying only two slots Should be visually "living room compatible" from the…
I've having a hard time breaking free the removable command strip mounts from @Marcus_543412 (Can't break free at all even after completely destroying it). But I really need this design as it become impossible to remove the command strip…
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
This is a holder design specifically for this KVM model (not affiliate) that you can buy from Amazon. Multiconnect is used for the connecting interface and it align with openGrid's 28mm grid size.
It's intuitive enough to be self explanatory. You can customize active tiles/screw holes/connector holes/chamfers visually, just by clicking. And it's fast, much faster than using openSCAD to generate the board, especially when stacked.…
Mount the power supply of a UCG Fiber onto openGrid, via openConnect I printed it with support, auto/snug/top Z distance : 0.3mm
The under-desk hanger for my 8bitdo Ultimate 2C controller (likely fitting others too), for Multiconnect connectors with openGrid spacing (28mm). Bottom curve from this stand . Multiconnect slot from the modeling files . Dongle slot from…
I’ve created a BETA openGrid MultiConnect Lock Snap_Looser / Remover to help loosen the threads on the MultiConnect system. This allows for easier installation and removal during assembly and disassembly. To Find BETA openGrid…
Information This is a portable briefcase-style case for the Framework Laptop 12's mainboard. It has an 8x4 openGrid inside for mounting custom modifications, or anything else you may wish to put on it, making it modular and highly…
I remixed the Skadis Unifi Fiber mount to openGrif via openConnect. I've added four versions, to get four directions, when using the integrated power cable channel. I printed it with support, auto/snug/top Z distance : 0.3mm The 3mf has a…
Sharpening stone holder for openGrid using the openConnect connector. The holder was designed using mitufy's openConnect - General Holder Generator , it's designed to hold eight stones. It is designed to hold my “diamond” stones, I…
An open-source self-expanding snap for openGrid, available in Standard and Lite versions. It is based on David D's official openGrid snap, with a split spring mechanism that expands when the connector is tightened. This gives the snap a…
Multiboard created a cross piece for Klippt using this piece with multipoint to use Klippt on their board. I am using OpenGrid and I wanted to use Klippt, so I made these pieces. David D already has multiboard compatibility snaps, but not…
This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…
UPDATED! - I have added Reversible ones so the handle can now be to the left or right Keep your filament organized with this modular spool holder designed for OpenGrid and multiboard systems! Perfect for workshop organization and easy…
I needed a single set of squares and downloaded the step file, went to fusion. Was only able to get some of the faces removed. Took the remaining parts and cut them off the top and saved the above prusa slice version I've uploaded. Please…
An open-source frame-fit hook generator for openGrid . This model attaches directly to the frame of an openGrid board, so it does not need a separate snap or openConnect connector. The default settings generate a compact hook for holding…
A helmet hook adapted for openGrid , using a snap-fit Multiconnect connectors.
I wanted a way to directly mount OpenGrid to my desk, so made this. It's designed for my desk, so I've added the STEP file in case you want to adjust it to your own dimensions. I put 2 snaps per clamp for a stronger hold. Note When…
An open-source gadget hook generator for openGrid . This model creates hooks that screw into openGrid self-expanding snaps . While other hook generators are available for the openGrid system, this model addresses some specific use cases,…
An open-source plier holder generator for openGrid . This model creates plier holders that screw into openGrid self-expanding snaps . It is designed around a stem for the pliers to hang on and a front stopper that helps keep them from…
The Prusa Core One has a side cavity perfect for customization and accessory storage. The openGrid ecosystem is a great option for this purpose through the combination of native parts and compatibility with MultiConnect, HSW, MultiBoard,…
This is a snap-in mount designed to attach Garmin devices to the openGrid system. I created it to keep all my cycling gear in one place, as openGrid is my go-to system for modular organization. No supports needed, just print as oriented…
DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…
An openGrid mount for large 3M Command Picture Hanging Strips ( like these ). These include Multiconnect threads so other attachments can be mounted to the same grid space. There's also a spacer model included, which can be used to…
A holder for mini cars, dedicated to the openGrid system. I designed it in an angled position to showcase the cars more clearly and make swapping easy. Works with both full and lite board versions. Credits to David D who created openGrid…
You need to print a multiconnect mount for connecting to the grid. Select Multiconnect for openGrid > BETA openGrid Multiconnect Lock Snap and openGrid Foldable Multiconnect for printing. Installation requires two grid cells , as the…
The original size was using holes which do not correspond to spacing used by openGrid. This version makes the base a bit wider and aligns the holes with squares in an openGrid board.
A thin expo marker holder for opengrid, connects with Multi-Connect. I printed "0.2mm Balanced" default settings, no supports OnShape:…
Overview I like having some post-its and small index cards (DIN A8) around in the office so I've created this pretty simple model. There are two versions: Mounted using Multiconnect and the 28mm openGrid spacings Mounted using openConnect…
This is an openGrid snap to hold a pair of CORE One Nozzle Replacement Tools , in case you have multiple versions (like the E3D remix ). The design minimizes how much the tools stick out from the grid and ensures visibility of the tool…
This is an OpenSCAD implementation of the openGrid system. This is a very basic implementation and it's missing some notable features, such as connecting pegs. I'm happy to add features as requested.
This is for attaching a HP 45W USB-C laptop charger to an openGrid board using multiconnect. Print one of each part, using the settings you used for the other components of your openGrid setup. This power adaptor is not very heavy. You…
Found this great WD19dc dock but my thunderbolt input was covered. Added a cutout for it.
Decorative shelf for the standard sized openGrid system. Example photo small size uses one snap. I have also added files for openConnect models including a large 1.5x size which uses two openConnect hangers on the back.
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. While the 2 part assembly allows using a folded screw that can be printed in a stronger orientation*, that isn't always necessary,…
This Multiconnect snap is a remix based on the openGrid lock snap from openGrid by David D . It was made by combining a multiconnect connector with the (beta) lock snap. In my testing, I found that the one of these lock snaps can hold…
Included are STLs with and without modeled-in supports. Supports probably aren't necessary but can help if you have wobble issues on tall prints.
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
This uses the locking version of https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system to attach BSI glue and activator to openGrid. The glue holder is a little big (as can be seen in the picture) because it…
A mounting slide for GunplaMark's Ultimate Cereal Container Filament Drybox that mounts onto openGrid using openConnect. Print with the large flat face on the bed - doesn't need any supports. I'm using these with 2x…
A remix of jimmybish's HSW Ryobi Battery Holder. Tested on OpenGrid but it should find a home on all Multiconnect compatible wall systems. I was unaware there were existing solutions for OpenGrid at the time of design, but I don't like…
This is a remix of an existing multiboard underware project to instead mount using openConnect to openGrid/underware. I've included mounts for the Lite version (which is what I use) but you could easily mount to the full version. I've…
Phomemo D30 holder for openGrid. Attached with a openConnect connector. Print the D30 holder (I printed it vertically with supports at the bottom) and one set of the openConnect snaps. You can use other snaps, I've just included one set…
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
I created this piece to help snap large OpenGrid panels together. It's designed to work specifically with the opengrid panels with a multiboard-style threaded hole. I designed this to be used with some kind of vice (several 3D…
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
I've included 2 different snaps, one for openGrid lite and the other for regular openGrid. You only need to print one of them two times.
Update (2/15/2026): The openSCAD customizer by johnnydev13 on Makerworld is more versatile than my implementation. I wanted to wrap some opengrid lite panels around my desk edge. Couldn't find a solution that worked and this is what I…
This is a Frankenstein remix of two models to quickly create a functional locking OpenGrid insert that can take 1/2 Inch 20 TPI as used by Loc-Line, or rather the Chinesium knock offs of the 1/4" inch piping. That line was originally…
Made a USB holder to connect to openGrid. This should be printable as one piece with no supports.
Relay G10 holder for openConnect. Just print one of the snaps and connect to openGrid using https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system
OpenGrid mount for Lenovo AC Power Adapter 135w (ADL135SDC3A) with quick twist release
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect connector. I made these simple snaps have the multiconnect connector as part of the snap. There are 2 different snaps, one using the standard…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
So I've included the snap to connect to openGrid, if you want to use Multiboard, you'll need to get the Drop In Nut Snap and print 2x of them. Otherwise, print 2x of the included openGrid M4 Nut Directional Snap. You'll also need 2x m4…
Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…
This is a simple blank sign that you can customize using your slicer's text function. Thanks to multiconnect, it can be attached to a lot of different systems like Ikea Skadis, Multiboard, Opengrid, .. Just print your respective connector…
In general: Print one of each. Put Velcro through the channel and put it on the board. Fasten the power brick with Velcro. Velcro channels are 15mm wide and 1.5mm deep. That is 150/254 inch by 15/254 inch if you prefer fractions and…
Magsafe iPhone and Airpods Pro2 Dock - Mount for openGrid Multiconnect - Swivel Charging works for Airpods2+ Case in vertical position and even iPhone 13mini which has camera lenses near the magsafe magnet ring. It fits for 2nd gen…
Remix of Multiboard Glasses Stand by eugenyale . Changed the connector from Multiboard to openConnect. Also added a longer version (the one shown in the pictures). I got a good result by printing the model tilted forward and sunken into…
Remixed this simple and effective tool holder to fit openGrid. Works with a variety of common flush cutters. The regular one works perfectly with my cheapo cutters from Amazon, but I also remixed the narrow version in case yours are…
What I like about velcro strap spool is you don't need to measure anything… just wrap whatever you want, scizor it out and it's done. Hold big things like routers or small things like cables. No mess. Reusable. Totally flexible.…
This is a shelf to charge a mobile and or a powerbank for the Opengrid system. I glued the mountingplates for the openconnect systems to the back. I didn't found the object at printables but at MakerWorld: openConnect - eigenes…
I designed a mount fopr my Einhell Power-X Charger for the opengrid system. For the mounts I used the openconnect system ( https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system) I'm using 2 mountpoints…
This adapter allows you to integrate the IKEA Tradfri remote button with the OpenGrid system easily. It replaces the original battery cover of the button, adding a rigid mounting plate that fits perfectly into an OpenGrid grid wall or any…
A hybrid mount combining openGrid Lite screw-down stability with Underware channel-grip snap functionality
A simple, openGrid compatible mount & holder for wire cutters and pliers that slides on to two multi-connect slots. Can be printed standing up without supports
Printing: Print with PLA, print on funneled side, no supports needed. Consider adding a brim when using materials with build plate adhesion issues. Usage: I made these to guide cables below my Flexispot desk. 45 mm is enough for the…
This is a very simple yardstick holder for the opengrid system with
I used it to mount the charger PLG 20 A1 to my opengrid wall with the openconnect system The charger snaps in quite nice and the holder its perfect. Thanks for creating and sharing the model! https://www.printables.com/@Testurbator_503491…
This connects to openGrid using openConnect. I've included one attachment type but any of the openConnect snaps should work. I printed the holder as it would appear on the wall with supports.
openGrid USB & SD Card Holder (Support-Free) I couldn't find a dedicated USB/SD card holder for the openGrid ecosystem that met my needs, so I designed one! This model is a remix-inspired creation, blending the organization of classic…
These are the test tubes I have: https://www.amazon.com/dp/B06XFSSNH6 These are simple mounts to connect them to openGrid. It's currently one test tube per holder. They are too wide to do one test tube per grid.
This holds a tape measure to openGrid using openConnect. You can use any of the openConnect snaps but I've included the screw in type here. You need 2x snaps to connect to openGrid.
This was inspired by (but not remixed from) There is about 29mm between the two posts and my Knipex Cobra Pliers 87 02 250 fit perfectly. It should also fit the 87 01 250 pliers as well. Connects to openGrid using the openConnect snap…
I have a bunch of Altoid Tins kicking around and I thought it would be good to get them up on my wall and off my desk. I made this to hold 4x Tins on an openGrid wall using openConnect. Just print at least 2x of the snaps, 4x if you want…
This just holds a spool. It has bearings so depending how how it's mounted and how it feeds, it should be able to feed into a printer as well. I've included one set of openConnect snaps but any should work.
This is for https://www.amazon.com/Wiha-Zai-Haus-cacciavite-applicazioni/dp/B09411BWRV and I've included both openGrid attachments using openConnect and a Wall Control version. For the Wall Control version, print 4x of the Pins, one each…
This is an OpenGrid-compatible mount for the square Samsung BN44-01013A 48W power supply , used with various Samsung monitors such as the Samsung U28R552UQU . The model was created using the parametric modeller by BlackjackDuck . It…
A tray to have the Fanttik NEX E1 max readily available on an OpenGrid wall. The tray has enough space to open the box via the push to open mechanism and has openings on both sides to take the screwdriver out easily. It connects via 2…
A little segmented box for holding paint brushes, or pencils etc. I printed in PLA, it used 55 grams of fibre and took two hours on a BBL A1. Thanks to David D for the OpenGrid system.
A box to hold a Dymo LetraTag (current version) to an OpenGrid wall. Thanks to David D for the OpenGrid system Using PLA, it needs 52 grams of filament and takes about One hour and twenty minutes on a BBL A1
