Low-profile Dual CORE One Nozzle Replacement Tool Holder for openGrid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact openGrid holder for a pair of CORE One nozzle replacement tools
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is an openGrid snap to hold a pair of CORE One Nozzle Replacement Tools, in case you have multiple versions (like the E3D remix). The design minimizes how much the tools stick out from the grid and ensures visibility of the tool labels. Designed with the the openGrid Core One Side Panel in mind, so tools are held centered in a 3x3 region to make the most of the limited grid space.
Print without support in the provided orientation (snap flat on the bed). Overhangs max out at 60 degrees which should be no problem on the CORE One.
Uses a directional lite snap for a little bit of extra resistance against bumps when putting the tool back in. To install, insert the top edge first and then snap in the rest.
Please let me know how it works for you or if you have any other feedback!