Multiconnect Ryobi Battery Holder (works with OpenGrid, HSW, SKADIS, GOEWS, Multiboard)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A multiconnect solution for Ryobi Batteries. Tested on OpenGrid.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A remix of jimmybish's HSW Ryobi Battery Holder. Tested on OpenGrid but it should find a home on all Multiconnect compatible wall systems. I was unaware there were existing solutions for OpenGrid at the time of design, but I don't like how existing solutions for OpenGrid are worse for cable management to the sides and less "clean".
For print settings I printed this at 0.3 Draft supportless, the battery receptable should be oriented to the print bed. If you really enjoy cleaning out supports you could always have the Multiconnect oriented toward the print bed :)
Thanks to DavidD for OpenGrid and Multiconnect and to jimmybish for the original model!