Liczymy pasujące modele…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
I got tired of having off-center and crooked predrill holes for installing the MultiBoard Core grids in my UnderWare (https://www.printables.com/model/941161-underware-the-ultimate-cable-management-solution) system, so I made this small…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A simple hook/hangar for the back splash of a cubicle. Using the 9mm large T nut, I simply extruded a hook that was dimension to the thickness of the cube wall.
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Add a bin to your Multiboard wall !
Wydruk około 0,45 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I took a 2x1 CU basic shelf and added the slab with holes and embossed sizing. Print as is no supports.
Wydruk około 4,34 €–5,31 € nettoWstępna wycena jednego wariantu
This simple bin can easily be attached to your multiboard using the multiconnect connector system . I would recommend to at least use 4 connectors, one for each edge. Note the bin is using an optimised “quick change” version of the…
Overview A complete print in place paper towel holder for the Multiboard system. It will require four snaps . Push-Fit, Bolt-Lock and Pegboard Click options available. It's a good idea to have access to the back of your board if you use…
With the original 90° corners 3 networkcables were a little too tight for my taste, so i made a 45° variant.
I was needing a sticky note holder for my new Multiboard, so I remixed @britt_3d_742976 's sticky note holder . I added two Multiboard pegs with built in supports. Once printed you can just snip off the supports under the pegs. The…
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
An allen key holder that can quckly be pulled of your multiboard so you can bring them with you, quick to replace once work is complete aswell. The design has two parts, a base piece that connects to the multiboard through push fit, and…
Created a variation of the AFA Deburring tool holder to work with Multiboard and utilize the snap connector. There are some push-fit options out but I like the direct application and single print of the snap connector option for things I…
Important note: Multiboard now includes official STEP files, I recommend to use those when creating your own models in CAD software: https://www.multiboard.io/parts-library/remixing Description: This is not intended to be printed…
Take your soldering setup to the next level with this modular, organized soldering workstation , designed by Aaron Rollens and built for real-world use at FIRST Robotics World Championship . This setup combines an 80/20 extruded aluminum…
This is a remix of AA and AAA battery dispenser to be used on your multiboard organizer wall Category: 3D Printing
The other parts of the original DisKeeper can be stacked on top of this one: 125mm Cover, 125mm Spacer or 125mm bins.
just another cable tie clip for Multiboard/Underware. It allows for (hook-and-loop) cable ties up to 12 mm wide. The final result does not look as tidy as other Underware components but is a quick print and the cable ties allow for a…
Info This case is made especially for the Multiboard v2 with ESP32 and AS01 NRF24 Chip on it! Its made press fit, glue is maybe required if board tolerances are too big. What you need to print: 1x Botton 1x Top 1x Slider 2x Button No need…
The Multiboard Snap Backer Generator is a parametric OpenSCAD script that accepts length and width inputs to generate a surface with Multiboard snaps at the correct 25mm spacing (or other spacing specified by the user). This can make…
This holder mechanically attaches to the multiboard using threaded screws (see https://www.printables.com/model/980088-multiboard-compatible-bolt-for-small-thread ) The caldigit generates significant heat, so there is a clearance between…
A simple component/parts box holder for your Multiboard. You also need 2 multiboard large bolts to screw it into a multihole. In the pictures i used 13mm bolts with a push-fit head. 9mm would probably work as well. There are two versions:…
Overview A quick and easy way to mount your ratchets to Multiboard. These locking Ratchet Mounts present themselves in Big Thread, Small Thread, Bolt-Lock, and Push-Fit adaptations. Other printed parts may be required for mounting such as…
Mounts a Google Home/Nest Mini on multiboard.
I tried the Wera hex remix by Cram but they didn't fit my multiboard. I remixed them using hooks from a standard multiboard peg hole hook which fit perfectly.
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
A recreation from scratch of @Hasanen's Multiboard/Underware Koppla power strip brackets , but instead of using push fit Snaps it uses Big Thread screws. I found that due to the weight of the power strip and attached power bricks and…
NOTE! I have now designed several of these holders so this text is copied and pasted to each of them so the links work. The various holders are designed to accommodate bottles in a range of sizes and were originally designed specifically…
Bottle holder for the Multiboard using the Multiconnect system. Various sizes includes but the model is online with Onshape and is parametric. Use the URL and change the variable ‘size’ to whatever value you like. The fillets may need…
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
Simple LTT Screwdriver holder for Multiboard
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Hangs an Angle Grinder from the Protective Sheath. I designed it for my Dewalt DCG416 but likely works with others. The Radius of my…
This holder saves space on the board.
Passend für Multiboard, siehe https://www.multiboard.io Halter für Knipex 125mm Zangenschlüssel - 86 03 125 Halter für Knipex 150mm Zangenschlüssel - 86 03 150 Mounting for Knipex 125mm Pliers Wrench - 86 03 125 Mounting for Knipex 150mm…
I needed a way to store my breadboards somewhere, so I designed this holder for the Multiboard which can store up to 7 breadboards. The printing orientation is provided in the STL file. It was designed to print upside down to avoid using…
What is it? It's an as-small-as-possible case around the “Kasiin NRF24+ESP32 Multi board v2.6” for the Flipper Zero. Use the pin guard to keep it in your pocket without the pins suffering. Comes with the Fusion 360 file, so you can make…
Halter für die Anschlagswinkel von Lets Bastel. (evtl. auch für andere Winkel passend) Vier Varianten, für den kleinen (Minimus) und mittleren (Universalis) Winkel, jeweils rechts oder links. Kein Support notwendig. Die Halter nutzten den…
The channel clips are designed to be used with Hands on Katie's Underware channels . The original channel base design works well but it was a lot of extra printing (channel base + the connector insert) compared to using this model. The…
This is designed specifically for the Wolfbox MF50 Electric Air Duster. Uses Multipoint Rails so you can mount this on both Multiboard or Pegboard. Requires two of these Pegboard Click - OXO Rail Pop-In if you want to mount it on a…
3D case for Flipper Zero WiFi Multiboard NRF24+ESP32
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
A long hook for the multiboard system Uses the new “on grid” snaps and “Locking Bolts” Prints flat side down for strength and convenience
My Method I used Fusion to turn the original STL back into a solid before drafting the slots by an additional 20 degrees relative to the bottom face. I have provided the F3D file and a STEP file for further remixing. Printing Tips Print…
Update: New edition with more uniform design than my more experimental original ones I made for my own use. This version uses the same spacing for the connectors and is easier to re-organize. 36 mm & 46 mm holders for MrHobby and Tamiya…
AA & AAA Battery Dispenser for Multiboard A simple dispenser for AA and AAA batteries that clips onto the Multiboard. Drop batteries in from the top, pull the next one out from the bottom (to the side). FIFO. Can hold 12 AA and 13 AAA…
Description Einhell 18v Power X-Change for Multiboard This mount is designed to connect the Einhell 18v Battery firmly with the Multiboard. The mount is secured with a T-bolt so that it cannot be pulled out upwards. Connects via Mid…
I really liked the design and style of the HSW Multi-purpose Holder , but I use multiboard, so I recreated it for myself. Right now I have 3-20mm, but will work on adding the larger sizes too. The 3-20mm fit in the space of a single…
Nice snug fit compared to generic screwdriver holders. Works with LTT Precision Screwdriver. Linus Tech Tips Screwdriver. Modified from Mikhail design to work with Multiboard.
Multiboard compatible mount for the 1st Generation Amazon Echo Mounts. Quick and easy to print, only took me 2hrs. Printed with no supports. Requires 2x Multiboard small thread-flat head T bolts:…
This is a CFS Buffer Mount for the K1 CFS upgrade. This moves the buffer to the side instead of on the back of the printer with multiboard panels installed. This mount requires 2 M3x8 Screws to install the buffer to the mount.
A set of screwdriver holder for multiboard. The angled orientation allows for easy removal of the screwdrivers, and multiple rows can be stacked in a minimum of space. Diameters are 4, 5, 6, 7, 8, 10, 12, 14, 16mm.
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
These are made for various sizes of Mechanical Squares. If you need a size that I did not upload and have an onshape account, you can copy this document and enter the appropriate width, depth, and height for your square. For the width and…
This is another remix of https://www.printables.com/@FixThisBuildThat original tool holder.
A holder for your Axminster - or other brand of the same design - protractor. Requires a Muliboard Snap to fit to wall panel. Printed with PLA using standard Multiboard settings. Depending on how good your bed adhesion is, you may require…
A push fit that has a hole for a 3/4" socket.t
Pencil holder for Multiboard with 16 slots for storing soldering tips.
Just a simple push fit multiboard holder for the deburring tool made by AFA Tooling. Prints supportless.
A set of container for Multiboard in many different sizes. The filenames indicate the size: height x depth x width. A parametric FreeCAD file is also available for those who want to generate other sizes.
This holder is part of the Multiboard modular system, designed to organize a 20pc 1/4" ratchet set efficiently. It holds 18 sockets, a ratchet, and an extension, keeping your tools accessible and tidy. The design prints flat with no…
Had some pens on my desk that i wanted to clear out. So made this with a couple of compartments. You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in to mount mine - but im sure any other…
An updated version of Chris3DPrints' Deburring Tool Holder for Multiboard, where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - uploaded - a…
I designed them so there is enough clearence between the tool and the Multiboard tile for your hand to grab it. I needed 4 different versions. Differences are in the hook diameter, and the distance from the center of the hook circle and…
I made this as a challenge to myself so I could finally go through with modeling as well as trying to make more things for my Multiboard system. This is my second model that I've design from scratch with the exception of the snaps on the…
This uses the Lite Multipoint Rails and requires at least two Lite Multipoint connectors. I use these . Prints without supports using the typical Multiboard settings. Step and Fusion 360 files included.
I suggest to use 30% infill at least. If you find this object useful, give me a like!
I tweaked the original model Elegoo Centauri Carbon Multiboard side panel [Mod] by Skrattoune Why the Changes? I have my Filament Sensor and Spool Holder on the right side of my Centauri Carbon. I didn't want the plate to stick past the…
This will require supports. I printed PLA with auto-generated PETG supports, Organic style and 0 (soluble) as Top contact Z distance. To use less support material you can print the holder lying down, if you can deal with the large…
== Aha moment == There's so much unused space behind my pc screen (Lenovo ThinkVision T24i-10) that I though it would be the best place to have a Multiboard and hang some of the things laying on my desk. == Problem == Drilling the screen…
This is a simple Multiboard @KeepMaking press fit mount I designed to hold a retractable Olfa knife. I hope it can help anyone who can benefit from it. Works great.
Added a tight fit snap connector to this for the multiboard.
Backstory In my ongoing quest to keep my workspace tidy and my headphones easily accessible, I found myself searching for the perfect headphone and cable holder for the Multiboard/Multibuild system. To my surprise, nothing quite fit the…
Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating multiboard/multibin/multipoint . Made with FreeCAD. My first attempt at…
Someone on reddit asked why there was not much holding together the top of a multiboard container made with beams. I've used beams on top instead of just the corner pieces before, but why sacrifice space on that top opening. Lacking most…
Less likely to fall off the wall plier holder. Needs the following parts. https://thangs.com/designer/MultiBuild/3d-model/Moderate%20Weight-Bearing%20Snap-1311034 https://thangs.com/designer/MultiBuild/3d-model/Locking%20T-Bolt-1310062
As the title says, its a Holder for a UV flashlight based on the Multiboard system, but it also works with anything that has a diameter of 55mm. It uses a modified bolt that is a bit shorter then the official short bolt. I didn't make the…
Hold all your gluesticks in one area ready and close by your 3d printer.
Compact and sturdy utility knife holder designed for the Multiboard system. Keeps your knives organized and within easy reach while saving space. Mounts using Pegboard Click – 1 LU Bin Fit – OO Fold-In Locked Lite Rail (1 MU Rail) for a…
Multiboard/Multibuild holder for your Bil Tema Multimeter (art. 15-133) You would need a Rail popin of your choice. Personally i used a Bolt Locked Insert OXO Rail Pop-in with a Folded Locking Bolt , but there are multiple other options…
I couldnt immediately find what I thought was orginally a niche requirement, but might be useful to others if it doesnt already exist. This is a multiboard bolt, without a head which fits into the large thread areas and provides an extra…
SNES controller Multiboard Pushfit mount.
Another design idea that began with my wife saying, "Can you make me something..." After I built the Storage Carousel for her markers, she had more that she wanted on the Multiboard wall right next to her desk. She pulled the center cup…
This is a shelf I made for myself to set my Ego Charger on to free up space on my toolbox. I had multiple people ask about it and I didn't save it so I recreated it in a few different variations to save time and material.
Support only for the upper hex slot. Recommended to print out of something more solid than PETG. PC would work the best.
New to 3D printing and this is my first 'made from scratch' so please be kind. I was looking for a mount for my Uni-T LM40 Laser distance measure tool but could not find one. So I Google'd a bit and tried my luck with Fusion360. I made a…
Got my Steam Controller a few days ago and needed a mount for my little Multiboard wall. Couldn't find any that I liked, so made one myself. It fits perfectly, like a glove, so wanted to share with people, if anyone wants one too. That…
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
Orientation: Print on side (for maximum strength and to avoid supports). Material: PLA. Infill: 15% (Grid or Gyroid recommended). Supports: None required.
Glasses shelf for the Multiboard system. Designed to be mounted using Multiboard Small Thread, Flat Head T-Bolts Orientation: Print on bottom (for maximum strength and to avoid supports). Material: PLA. Infill: 15% (Grid or Gyroid…
MultiBoard/MultiBuild holder for the iFixit Mako Precision Screwdriver set. It has 2 multibin rail slots in the back to allow for mounting. I personally am using 2 Flush Large Thread - Lite Fix Points , but any of the Lit Fix Points…
File names give information on the tape measure the mount is designed for.
Holds circular blade package for fiskars rolling cutter Category: 3D Printing
I saw a couple of Skadis and Multiboard examples, but none of them covered my requirements - i.e. 2 Spare Batteries and the Orange dual head screwdriver - so made my own. Mounting requires 2 x Multipoints on the Multiboard Tiles (50mm…
Push-Fit Cutter/Plier holder for Multiboard/Multibuild. Push-Fit requires a Multiboard Snap.
Two models with different spacing between the hooks. One with 25mm, the other with 15mm.
Mount for 18V Makita cordless tools. Attach to mount via battery slot. Battery can rest on top of mount.
Screwdriver holder for Multiboard. Uses "big thread" connection. Includes 12.5mm long connector for offset panels and 6.25mm for flush panels.
Deburring tool holder w/storage for extra "blades". Compatible with Multibuild that prints without support. This is for the generic Amazon deburring tool that many companies print their name on.
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different. Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection. If your magnets seem too weak you can stack two…
I wanted a efficient way to store my sockets on my Multiboard wall, so I designed a simple customizable peg for Multipoint rails There are files ready for ½", 3/8", and ¼" inch sockets, but the provided FreeCAD file can be used to create…
